|
Morrison, D
|
Meeting the productivity challenge below 2.5 kilometres
UMT 2017: Proceedings of the First International Conference on Underground Mining Technology, UMT 2017
|
2017 |
|
|
Potvin, Y
|
The need for new technology to optimise the engineering design of ground support systems in underground mines
UMT 2017: Proceedings of the First International Conference on Underground Mining Technology, UMT 2017
|
2017 |
|
|
Brändle, R; Rorem, E; Luis, R; Fischer, G
|
Full-scale dynamic tests of a ground support system using high-tensile strength chain-link mesh in El Teniente mine, Chile
UMT 2017: Proceedings of the First International Conference on Underground Mining Technology, UMT 2017
|
2017 |
|
|
Snell, G; Kuley, E; Milne, D
|
A laboratory-based approach to assess rockbolt behaviour in shear
UMT 2017: Proceedings of the First International Conference on Underground Mining Technology, UMT 2017
|
2017 |
|
|
Rispin, M; Kleven, OB; Dimmock, R; Myrdal, R
|
Shotcrete: early strength and re-entry revisited – practices and technology
UMT 2017: Proceedings of the First International Conference on Underground Mining Technology, UMT 2017
|
2017 |
|
|
Kothe, T
|
TamCrete structural support liner – a rapid polymeric structural support lining
UMT 2017: Proceedings of the First International Conference on Underground Mining Technology, UMT 2017
|
2017 |
|
|
Chang, S-H; Choi, S-W; Lee, C; Kang, T-H; Kim, J; Choi, M-S
|
Performance comparison between thin spray-on liners with different compositions
UMT 2017: Proceedings of the First International Conference on Underground Mining Technology, UMT 2017
|
2017 |
|
|
Acuña, EI; Allen, C
|
Ventilation control system implementation and energy consumption reduction at Totten Mine with Level 4 Tagging and future plans
UMT 2017: Proceedings of the First International Conference on Underground Mining Technology, UMT 2017
|
2017 |
|
|
Acuña, EI; Dobson, A
|
Results of the return air raise silencer system upgrade at Totten Mine
UMT 2017: Proceedings of the First International Conference on Underground Mining Technology, UMT 2017
|
2017 |
|
|
Harris, W; Kadiayi, AK; Macdonald, K; Witow, D
|
Environmental discharge criteria and dispersion estimation for mine ventilation exhaust stacks
UMT 2017: Proceedings of the First International Conference on Underground Mining Technology, UMT 2017
|
2017 |
|
|
Millar, DL
|
A reverse Brayton cycle mine refrigeration system
UMT 2017: Proceedings of the First International Conference on Underground Mining Technology, UMT 2017
|
2017 |
|
|
Cluff, DL; Foster, PJ
|
Advances in cryogenic chilling technology for deep mines
UMT 2017: Proceedings of the First International Conference on Underground Mining Technology, UMT 2017
|
2017 |
|
|
Zhang, H; Hauta, R; Fava, L
|
Mine schedule optimisation with ventilation constraints: a case study
UMT 2017: Proceedings of the First International Conference on Underground Mining Technology, UMT 2017
|
2017 |
|
|
Saeidi, N; Romero, A; Fava, L; Allen, C
|
Simulation of large-scale thermal storage in fragmented rock modelled as a discretised porous medium – application to the Natural Heat Exchange Area at Creighton Mine
UMT 2017: Proceedings of the First International Conference on Underground Mining Technology, UMT 2017
|
2017 |
|
|
Álvarez, RA; Acuña, EI
|
Ventilation and fire door coverage solution at the Chuquicamata underground mine project
UMT 2017: Proceedings of the First International Conference on Underground Mining Technology, UMT 2017
|
2017 |
|
|
San Martin, YH; Hurtado, JP; Vargas, JP; Acuña, EI
|
Rapid selection strategies for tunnel development auxiliary ventilation systems
UMT 2017: Proceedings of the First International Conference on Underground Mining Technology, UMT 2017
|
2017 |
|
|
Reyes, G; Hurtado, JP; Vargas, JP; Acuña, EI
|
Computational fluid dynamic study of primary parallel fan stations
UMT 2017: Proceedings of the First International Conference on Underground Mining Technology, UMT 2017
|
2017 |
|
|
Carusone, O; Hudyma, M
|
Variations in apparent stress and energy index as indicators of stress and yielding around excavations
UMT 2017: Proceedings of the First International Conference on Underground Mining Technology, UMT 2017
|
2017 |
|
|
Woodward, KR; Tierney, SR
|
Seismic hazard estimation using databases with bimodal frequency–magnitude behaviour
UMT 2017: Proceedings of the First International Conference on Underground Mining Technology, UMT 2017
|
2017 |
|
|
de Beer, W; Jalbout, A; Riyanto, E; Ginting, R; Sullivan, M; Collins, DS
|
The design, optimisation, and use of the seismic system at the deep and high-stress block cave Deep Mill Level Zone mine
UMT 2017: Proceedings of the First International Conference on Underground Mining Technology, UMT 2017
|
2017 |
|
|
Rebuli, DB
|
Correlating seismic wave velocity measurements with mining activities at Williams Mine
UMT 2017: Proceedings of the First International Conference on Underground Mining Technology, UMT 2017
|
2017 |
|
|
Wang, X; Cai, M
|
Numerical analysis of ground motion in a South African mine using SPECFEM3D
UMT 2017: Proceedings of the First International Conference on Underground Mining Technology, UMT 2017
|
2017 |
|
|
Abolfazlzadeh, Y; Penhall, SL; McKinnon, SD
|
Statistical analysis of the outlier events from seismic stress inversion
UMT 2017: Proceedings of the First International Conference on Underground Mining Technology, UMT 2017
|
2017 |
|
|
Ferguson, GA; Didyk, M; Zenteno, LF; San Martin, JF; Fowell, RJ
|
Cave mining design methodology for use in challenging geomechanics environments
UMT 2017: Proceedings of the First International Conference on Underground Mining Technology, UMT 2017
|
2017 |
|
|
Suzuki Morales, K; Suorineni, FT
|
Using numerical modelling to represent parameters affecting cave mining
UMT 2017: Proceedings of the First International Conference on Underground Mining Technology, UMT 2017
|
2017 |
|
|
Nezhadshahmohammad, F; Khodayari, F; Pourrahimian, Y
|
Draw rate optimisation in block cave production scheduling using mathematical programming
UMT 2017: Proceedings of the First International Conference on Underground Mining Technology, UMT 2017
|
2017 |
|
|
Malaki, S; Khodayari, F; Pourrahimian, Y; Liu, WV
|
An application of mathematical programming and sequential Gaussian simulation for block cave production scheduling
UMT 2017: Proceedings of the First International Conference on Underground Mining Technology, UMT 2017
|
2017 |
|
|
Ugarte, E; Pourrahimian, Y; Boisvert, JB
|
Determination of optimum drawpoint layout in block caving using sequential Gaussian simulation
UMT 2017: Proceedings of the First International Conference on Underground Mining Technology, UMT 2017
|
2017 |
|
|
Lee, C; Gu, F
|
Co-disposal of waste rock with backfill
UMT 2017: Proceedings of the First International Conference on Underground Mining Technology, UMT 2017
|
2017 |
|
|
Hane, I; Belem, T; Benzaazoua, M; Maqsoud, A
|
Laboratory investigation into the compressive strength of cemented paste tailings aggregate fills
UMT 2017: Proceedings of the First International Conference on Underground Mining Technology, UMT 2017
|
2017 |
|
|
Koupouli, NJF; Belem, T; Rivard, P
|
Shear strength between cemented paste backfill and natural rock surface replicas
UMT 2017: Proceedings of the First International Conference on Underground Mining Technology, UMT 2017
|
2017 |
|
|
Turichshev, A; Cotesta, L; Brummer, R; Beauvais, M
|
Estimation of fill strength requirements using bonded particle modelling for mining under cemented rockfill
UMT 2017: Proceedings of the First International Conference on Underground Mining Technology, UMT 2017
|
2017 |
|
|
Yang, PY; Li, L
|
Numerical and limit equilibrium stability analyses of cemented mine backfill upon vertical exposure
UMT 2017: Proceedings of the First International Conference on Underground Mining Technology, UMT 2017
|
2017 |
|
|
Benecke, N
|
iDeepMon – intelligent deep mine shaft inspection and monitoring
UMT 2017: Proceedings of the First International Conference on Underground Mining Technology, UMT 2017
|
2017 |
|
|
Azhari, F; Kiely, S; Sennersten, C; Lindley, C; Matuszak, M; Hogwood, S
|
A comparison of sensors for underground void mapping by unmanned aerial vehicles
UMT 2017: Proceedings of the First International Conference on Underground Mining Technology, UMT 2017
|
2017 |
|
|
Cecchetti, M; Rossi, M; Coppi, F; Bicci, A; Coli, N; Boldrini, N; Preston, C
|
A novel radar-based system for underground mine wall stability monitoring
UMT 2017: Proceedings of the First International Conference on Underground Mining Technology, UMT 2017
|
2017 |
|
|
Rodriguez, G
|
Underground versatile laser scanning solution
UMT 2017: Proceedings of the First International Conference on Underground Mining Technology, UMT 2017
|
2017 |
|
|
Pak, M; Preston, RP; Groccia, C; Taylor, J
|
Conventional and advanced borehole investigation methods for inaccessible underground voids
UMT 2017: Proceedings of the First International Conference on Underground Mining Technology, UMT 2017
|
2017 |
|
|
Ahmed, SN; Gagnon, JD, Makhdoom, MN; Naeem, R; Wang, J
|
New methods and equipment for three-dimensional laser scanning, mapping and profiling underground mine cavities
UMT 2017: Proceedings of the First International Conference on Underground Mining Technology, UMT 2017
|
2017 |
|
|
Siren, T; Hakala, M; Perras, MA
|
Reliable in situ rock stress measurement from the excavation surface
UMT 2017: Proceedings of the First International Conference on Underground Mining Technology, UMT 2017
|
2017 |
|
|
Goodfellow, SD; Simser, B; Drielsma, C; Gerrie, V
|
In situ stress estimation using acoustic televiewer data
UMT 2017: Proceedings of the First International Conference on Underground Mining Technology, UMT 2017
|
2017 |
|
|
Maybee, B; Yana, J
|
Using the single index model to create a short-term mine plan
UMT 2017: Proceedings of the First International Conference on Underground Mining Technology, UMT 2017
|
2017 |
|
|
Cai, SJ; Lyu, WS; Wu, D; Yang, P
|
Mining method optimisation of Bayi gold mine based on the value engineering principle
UMT 2017: Proceedings of the First International Conference on Underground Mining Technology, UMT 2017
|
2017 |
|
|
Salamanca, JM; Rodriguez-Diaz, OO; Fernández, AA; Niño-Merchan, JJ; Rojas, B
|
Modernisation of the underground coal mining sector in Colombia – a proposal from the academy
UMT 2017: Proceedings of the First International Conference on Underground Mining Technology, UMT 2017
|
2017 |
|
|
Whittier, M; Hauta, R; Fava, L
|
Robust mine schedule optimisation
UMT 2017: Proceedings of the First International Conference on Underground Mining Technology, UMT 2017
|
2017 |
|
|
Hauta, R; Whittier, M; Fava, L
|
Application of the GeoSequencing Module to ensure optimised underground mine schedules with reduced geotechnical risk
UMT 2017: Proceedings of the First International Conference on Underground Mining Technology, UMT 2017
|
2017 |
|
|
Napa-García, GF; Navarro Torres, VF
|
Applicability of failure strain for the stability evaluation of square pillars in room and pillar mining
UMT 2017: Proceedings of the First International Conference on Underground Mining Technology, UMT 2017
|
2017 |
|
|
Kukkonen, S
|
Energy consumption analysis of battery electric vehicles in underground environments
UMT 2017: Proceedings of the First International Conference on Underground Mining Technology, UMT 2017
|
2017 |
|
|
Lyle, RR
|
Considerations for large-diameter raiseboring
UMT 2017: Proceedings of the First International Conference on Underground Mining Technology, UMT 2017
|
2017 |
|
|
Baiden, G
|
Telerobotics for hang-up assessment and removal – an idea whose time has come
UMT 2017: Proceedings of the First International Conference on Underground Mining Technology, UMT 2017
|
2017 |
|
|
Preston, RP; Roy, J
|
Use of unmanned aerial vehicles to supplement conventional investigation methods for underground open void stability and mitigation
UMT 2017: Proceedings of the First International Conference on Underground Mining Technology, UMT 2017
|
2017 |
|
|
Ferreira, N
|
Improving production data quality in underground operations
UMT 2017: Proceedings of the First International Conference on Underground Mining Technology, UMT 2017
|
2017 |
|
|
Baines, J; Bell, T; Grigg, N
|
Underground mineral processing – Gekko Systems modular Python
UMT 2017: Proceedings of the First International Conference on Underground Mining Technology, UMT 2017
|
2017 |
|
|
Choi, S-W; Lee, C; Ha, T; Kang, T-H; Chang, S-H
|
Endurance performance of conical picks with hardfacing for improving wear resistance
UMT 2017: Proceedings of the First International Conference on Underground Mining Technology, UMT 2017
|
2017 |
|
|
Firmanulhaq, SA; Kamarea, J; Hasan, R; Putra, F; Salim, F
|
Lessons learnt from egress drift excavation through a minor pillar in an extraction level, Deep Ore Zone mine, Freeport Indonesia, Papua
UMT 2017: Proceedings of the First International Conference on Underground Mining Technology, UMT 2017
|
2017 |
|
|
Lee, D-K
|
Evaluation of the optimum conditions for a local ventilation system in connection with the mine ventilation network
UMT 2017: Proceedings of the First International Conference on Underground Mining Technology, UMT 2017
|
2017 |
|
|
Salamanca, JM; Rodríguez, HE; Moreno, MM
|
Design and construction of a prototype for acidity level control in coal mining liquid effluents
UMT 2017: Proceedings of the First International Conference on Underground Mining Technology, UMT 2017
|
2017 |
|
|
Shelswell, KJ; Labrecque, PO
|
Discrete simulations modelling the impact of operator numbers and truck availability on haulage fleet productivity
UMT 2017: Proceedings of the First International Conference on Underground Mining Technology, UMT 2017
|
2017 |
|
|
Sotoudeh, F; Kakaie, R; Ataei, M
|
Development of a computer program for underground mine stope optimisation using a heuristic algorithm
UMT 2017: Proceedings of the First International Conference on Underground Mining Technology, UMT 2017
|
2017 |
|
|
Freire, GR; Cota, RF
|
Capture of images in inaccessible areas in an underground mine using an unmanned aerial vehicle
UMT 2017: Proceedings of the First International Conference on Underground Mining Technology, UMT 2017
|
2017 |
|