TY - CPAPER
T1 - RadFlow™ – the next generation feedwell
T2 - Paste 2012: 15th International Seminar on Paste and Thickened Tailings
AU - Krassnokutski, A
ED - Jewell, R
A2 - Jewell, R
ED - Fourie, AB
A2 - Fourie, AB
ED - Paterson, A
A2 - Paterson, A
DA - 2012/04/16
PY - 2012
PB - Australian Centre for Geomechanics
PP - Perth
CY - Perth
C1 - Perth
SP - 121
EP - 127
AB - Metallurgical thickeners have evolved over the past century in large technological leaps rather than through a slow and steady progression. The first of these technological leaps was the introduction of polymer flocculants in the 1950s which transformed large diameter conventional thickeners (with flux rates of 1‒2 t/m2/day and a rise rate of 1 m/h) into smaller diameter high rate thickeners (with flux rates of 2‒5 t/m2/day and a rise rate of 2–4 m/h) (Paterson & Cooke, 2010). The next leap was the development of more efficient closed feedwells in the 1980s which mixed the flocculant and feed more efficiently and distributed the feed into the thickener body more evenly. Lastly, was the development approximately 20 years ago, of so-called ‘auto-diluting’ systems in feedwells, which allowed feed dilution to take place internally (Triglavcanin, undated).
There is still much room for improvement in thickener design and it is theoretically possible to design smaller, more stable thickeners operating at higher flux rates. In qualifying this statement, let us first consider how thickeners are sized – flocc settling rates are accurately determined with jar tests or dynamic desktop thickeners and multiplied with a safety factor of two or more to give a practical design rise rate. However, logic tells us that a rise rate, marginally smaller than the settling rate, will allow for all floccs to settle out of solution. So, where does this large safety factor stem from?
This safety factor is the result of adverse flow effects within the thickener body which arise when changing from low aspect ratio desktop thickeners to high aspect ratio industrial thickeners.
By running a myriad of experiments on a scale model thickener, adverse effects associated with standard industrial feedwells were determined. These adverse flow effects include tangential swirl, radial recirculation and flow asymmetry. To counter these effects, a series of feedwell models were constructed and tested in the scale model thickener; options included shelves, baffles and vanes in varying configurations and geometries. Ultimately, the RadFlow™ feedwell evolved which best countered these adverse effects so that flocculated feed is evenly and gently introduced to flow into the thickener body.
UR - https://papers.acg.uwa.edu.au/p/1263_11_Krassnokutski/
ER -
DO - 10.36487/ACG_rep/1263_11_Krassnokutski