TY - CPAPER T1 - Experimental and numerical assessment of shear surface damage using 3D point clouds T2 - Slope 2013: 2013 International Symposium on Slope Stability in Open Pit Mining and Civil Engineering AU - Karekal, S AU - Poropat, GV AU - Guo, H ED - Dight, PM A2 - Dight, PM DA - 2013/09/25 PY - 2013 PB - Australian Centre for Geomechanics PP - Perth CY - Perth C1 - Perth SP - 273 EP - 280 AB - This paper describes modelling of shearing of rock joint surfaces using 3D point clouds generated using photogrammetry. High resolution 3D images of discontinuity surfaces were created before and after shearing. The surface damage due to shearing of joint surfaces was assessed using image processing by comparing the 3D images of undamaged surfaces with those of damaged surfaces. The shear surfaces were concrete replicas of natural surfaces. The damage due to shearing was estimated using numerical modelling in which comparison was made between the concrete surfaces before and after the shear test. It was found that the modelling results were fairly well correlated with the observed surface damage, thus validating the numerical models. The digitised surfaces could also be used to predict anisotropic shear strength and damage of the asperities by numerically shearing the joint surfaces at various directions. UR - https://papers.acg.uwa.edu.au/p/1308_14_Karekal/ ER - DO - 10.36487/ACG_rep/1308_14_Karekal