%0 Conference Paper %A Arbuthnot, I.M. %A Triglavcanin, R..A. %D 2005 %T Designing for Paste Thickening Testwork and Sizing for Paste Thickeners %P 99-116 %E R. Jewell & S. Barrera %C Santiago %8 20-22 April %B Paste 2005: Proceedings of the International Seminar on Paste and Thickened Tailings %X In the mineral processing industries, there is an increasing need to design thick- eners which are able to produce high density underflows usually referred to as “paste”. The behaviour of a flocculated suspension in compression needs to be well understood in order to arrive at a reliable thickener tank configuration (i.e. diam- eter, cone angle and depth) for a required paste result. As a suspension approaches paste consistency, its fluid characteristics change markedly. It develops a high yield stress, and may have an increased tendency to form agglomerates, which in thickener tanks leads to a phenomenon known as “rotating beds”, “donuts”, or “islands”. These characteristics present challenges to the designer of the rake mechanism. The subject paper addresses the requirements for designing a paste thickener, covering the following topics: • Testwork for thickener sizing. • Design of rake mechanisms. • Suspension rheology and effect on design. 100 Paste 2005, Santiago, Chile Designing for Paste Thickening... Arbuthnot, I.M. and Triglavcanin, R.A. %1 Perth %I Australian Centre for Geomechanics %U https://papers.acg.uwa.edu.au/p/563_6_Arbuthnot/ %R 10.36487/ACG_repo/563_6