TY - CPAPER T1 - Rheology Control of Thickened Tailings and Paste Pumping Systems T2 - Paste 2006: Ninth International Seminar on Paste and Thickened Tailings AU - Paterson, AJC ED - Jewell, R A2 - Jewell, R ED - Lawson, S A2 - Lawson, S ED - Newman, P A2 - Newman, P DA - 2006/04/03 PY - 2006 PB - Australian Centre for Geomechanics PP - Perth CY - Perth C1 - Perth SP - 47 EP - 56 AB - Thickened and paste tailings typically exhibit non-Newtonian characteristics. It is well established that the viscous properties of these slurries are dependent on a wide range of parameters, including particle size distribution, solids concentration, pH and water chemistry. However, many systems are still designed assuming a constant rheology, and operating conditions are specified in terms of slurry density. At low solids concentrations this is acceptable as the effects of changes in solids concentration on rheology are relatively small. As solids concentration increases, small increments have a significant impact on rheology. Designing for a constant solids concentration or density implies (unrealistically) that the ore body will be uniform throughout the mine life and results in systems that are not sufficiently flexible to accommodate the wide fluctuations in rheology that will occur. This paper presents an alternative methodology that assumes that solids concentration will vary naturally as physical properties change, and that rheology is the key driver to ensure a reliable, and integrated, system design. The benefits are numerous, including improved thickener control, optimum pumping system design, and obtaining consistent deposition and beaching angles. UR - https://papers.acg.uwa.edu.au/p/663_5_Paterson/ ER - DO - 10.36487/ACG_repo/663_5