DOI https://doi.org/10.36487/ACG_rep/1410_15_Charette
Cite As:
Charette, FC, Hyett, AJ, Voyzelle, B & Anderson, T 2014, 'Load-deformation behaviour of a deformable rockbolt and accessories under dynamic loading', in M Hudyma & Y Potvin (eds),
Deep Mining 2014: Proceedings of the Seventh International Conference on Deep and High Stress Mining, Australian Centre for Geomechanics, Perth, pp. 253-262,
https://doi.org/10.36487/ACG_rep/1410_15_Charette
Abstract:
This paper presents the results of investigation into the capacity of a deformable support system (D-Bolt) to handle various types of dynamic events. Instrumented D-Bolts and plates were subjected to drop tests, providing insights into the effects of dynamic loading onto dynamically resistant bolting systems.
Strain measurements are taken during and after the impacts on the bolt. A correlation is drawn from the static performance of the components and their dynamic resilience. A discussion on the reaction of a support system to various forms of dynamic events is presented and suggestions on further requirements of dynamic support system are put forward. Comparison to design methods and support system calculation are offered. Suggestions on dynamic testing protocols are also offered.
References:
Charette, F 2012, ‘Monitoring of dynamic bolts for high stress mining’, in C Hawkes (ed.), Proceedings of the 21st Canadian Rock Mechanics Symposium: RockEng 2012, Canadian Rock Mechanics Association, pp. 71-78.
Charette, F & Hyett, AJ 2013, ‘Monitoring of dynamic energy resistant rockbolts: laboratory and field results’, Proceedings of the 23rd World Mining Congress, Canadian Institute of Mining, Metallurgy and Petroleum, Westmount.
Charette, F & Li, CL 2011, ‘Innovative Engineering Approach to the Stabilisation of Rock Masses in High Stress Conditions’, Proceedings of the CIM Conference and Exhibition 2011, Canadian Institute of Mining, Metallurgy and Petroleum, Westmount.
Doucet, C & Anderson, T 2010, Laboratory testing of D-Bolts, CANMET-MMSL Report 10-043 (CR) Project 603828-00-0, Canada Centre for Mineral and Energy Technology, Ottawa.
Labrie, D, Doucet, C & Plouffe, M 2008, Design guidelines for the dynamic behaviour of ground support tendons: Phase 1, Technical information data sheets, CANMET-MMSL Report 08-008 (TR), Canada Centre for Mineral and Energy Technology, Ottawa.
Li, CL 2010, ‘A new energy-absorbing bolt for rock support in high stress rock masses’, International Journal of Rock Mechanics and Mining Sciences, vol. 47 pp. 396-404.
Li, CL & Charette, F 2010, ‘Dynamic performance of the D-Bolt’, in M van Sint Jan & Y Potvin (eds), Proceedings of the Fifth International Seminar on Deep and High Stress Mining, Australian Centre for Geomechanics, Perth, pp. 321-328.
Spearing, AJS, Hyett, AJ & Kostecki, T 2012, ‘New technology for measuring the in situ performance of rock bolts’, in A Bobet (ed.), Proceedings of the 46th U.S. Rock Mechanics Symposium, American Rock Mechanics Association, Alexandria, paper 12-497.
YieldPoint Inc. 2011a, dLogger Specifications Sheet, YieldPoint Inc., Kingston.
YieldPoint Inc. 2011b, dReader Specifications Sheet, YieldPoint Inc., Kingston.