An acoustic emission slope displacement rate sensor — case studies

doi:10.36487/ACG_rep/1508_54_Dixon

Authors: Dixon, N; Codeglia, D; Smith, A; Fowmes, G; Meldrum, P

DOI https://doi.org/10.36487/ACG_rep/1508_54_Dixon

Cite As:
Dixon, N, Codeglia, D, Smith, A, Fowmes, G & Meldrum, P 2015, 'An acoustic emission slope displacement rate sensor — case studies', in PM Dight (ed.), FMGM 2015: Proceedings of the Ninth Symposium on Field Measurements in Geomechanics, Australian Centre for Geomechanics, Perth, pp. 743-756, https://doi.org/10.36487/ACG_rep/1508_54_Dixon

Download citation as: ris bibtex endnote text Zotero

Abstract:
Research over a period of 20 years has resulted in development of a battery operated unitary acoustic emission (AE) sensor which, when used with a standard active waveguide installation, can quantify soil slope displacement rates continuously and in near real-time. The active waveguide is installed in a borehole through existing or anticipated shear zones, and comprises a steel tube with granular soil surround. The AE sensor is located at ground level and with the waveguide is encased in a cover. Deformation of the slope strains the granular backfill, which generates AE through rearrangement of the particles. The AE propagate as stress waves along the steel tube to the ground surface where they are detected and quantified by the sensor, which is used to provide alert text messages if pre-determined thresholds are exceeded. The use of a reproducible waveguide allows standard interpretation of the generated AE to provide information on soil slope displacement rates, and the granular soil backfill generates measureable AE when the system is installed in slopes formed in ‘quiet’ fine grained soils. The approach monitors AE at high frequencies to exclude environmental background noise and hence ensure that false alarms are not generated. In rock slopes, the grouted waveguide is passive, with measured AE generated by rock deformation mechanisms. The sensors have been deployed on multiple sites in the UK and in Italy, Austria and Canada. At all sites performance of the AE sensors has been compared with traditional deformation monitoring instrumentation including ShapeAccelArray, inclinometer, extensometer and time-domain reflectometry. Measurements from these field studies have demonstrated that generated AE are proportional to slope displacement rates. This paper outlines the AE measurement and the interpretation techniques developed, and presents field comparisons of measured AE trends and slope displacement rates obtained from extended trials at several sites. It is concluded that the AE technique can be used as a reliable early warning system for soil slope instability. Applications in rock slopes are promising but further work is required to link detected AE to rock deformation mechanisms and hence to derive thresholds as a basis for early warnings.

References:

Amitrano, D, Grasso, JR & Senfaute, G 2005, 'Seismic precursory patterns before a cliff collapse and critical point phenomena', Geophysical Research Letters, vol. 32, no. 8, pp. 1-5.

Cruden, DM & Varnes, DJ 1996, 'Landslide types and processes', in KA Turner & RL Schuster (eds), Landslides—Investigation and mitigation: Transportation Research Board Special report no. 247, National Research Council, National Academy Press, Washington, pp. 36-75.

Dixon, N & Spriggs, M 2007, ‘Quantification of slope displacement rates using acoustic emission monitoring’, Canadian Geotechnical Journal, vol. 44, no. 6, pp. 966-976.

Dixon, N, Hill, R & Kavanagh, J 2003, ‘Acoustic emission monitoring of slope instability: development of an active wave guide system’, Institution of Civil Engineers Geotechnical Engineering Journal, vol. 156, no. 2, pp. 83-95.

Dixon, N, Smith, A, Spriggs, MP, Ridley, A, Meldrum, P & Haslam, E 2015, ‘Stability monitoring of a rail slope using acoustic emission’, Proceedings of the Institution of Civil Engineers: Geotechnical Engineering (accepted for publication).

Dixon, N, Spriggs, MP, Marcato, G & Pasuto, A 2012b, ‘Landslide hazard evaluation by means of several monitoring techniques, including an acoustic emission sensor’, in EB Ebernhardt (ed.), Landslides and Engineered Slopes: Protecting Society Through Improved Understanding: Proceedings of the 11th International and 2nd North American Symposium on Landslides and Engineered Slopes, CRC Press, Boca Raton, pp. 1405-1411.

Dixon, N, Spriggs, MP, Meldrum, P & Haslam, E 2012a, ‘Field trial of an acoustic emission early warning system for slope instability’, in EB Ebernhardt (ed.), Landslides and Engineered Slopes: Protecting Society Through Improved Understanding: Proceedings of the 11th International and 2nd North American Symposium on Landslides and Engineered Slopes, CRC Press, Boca Raton, FL, pp. 1399-1404.

Dixon, N, Spriggs, MP, Smith, A, Meldrum, P & Haslam, E 2014, ‘Quantification of reactivated landslide behaviour using acoustic emission monitoring’, Landslides, vol. 13, no. 3. pp. 549-560.

Glendinning, S, Hall, J & Manning, L 2009, ‘Asset-management strategies for infrastructure embankments’, Proceedings of the Institution of Civil Engineers: Engineering Sustainability, vol. 162, no. 2, pp. 111-120.

Hardy, HR 2003, Acoustic Emission/Microseismic Activity Volume 1: Principles, Techniques and Geotechnical Applications, CRC Press, Boca Raton, FL.

Hutchinson, JN 1988, ‘General report: Morphological and geotechnical parameters of landslides in relation to geology and hydrogeology’, in C Bonnard (ed.), Proceedings of the 5th International Symposium on Landslides, Balkema, Rotterdam, pp. 3-35.

Koerner, RM, McCabe, WM & Lord, AE 1981, 'Overview of acoustic emission monitoring of rock structures', Rock Mechanics, vol. 14, no. 1, pp. 27-35.

Leroueil, S 2001, ‘Natural slopes and cuts: movement and failure mechanisms’, Geotechnique, vol. 51, no. 3, pp. 197-243.

Lockner, D 1993, ' The role of acoustic emission in the study of rock fracture', International Journal of Rock Mechanics and Mining Sciences, vol. 30, no. 7, pp. 883-899.

Petley, DN 2012, ‘Global patterns of loss of life from landslides’, Geology, vol. 40, no. 10, pp. 927-930.

Smith, A & Dixon, N 2014, ‘Quantification of landslide velocity from active waveguide-generated acoustic emission’, Canadian Geotechnical Journal, vol. 52, no. 4, pp. 413-425.

Smith, A, Dixon, N, Berg, N, Take, A & Proudfoot, D 2014b, ‘Listening for landslides: method, measurements and the peace river case study’, Proceedings of the 6th Canadian GeoHazards Conference, Canadian Geotechnical Society, Richmond, British Columbia, 10 p.

Smith, A, Dixon, N, Meldrum, P & Haslam, E 2014c, ‘Inclinometer casings retrofitted with acoustic real-time monitoring systems’, Ground Engineering Magazine, October 2014 issue.

Smith, A, Dixon, N, Meldrum, P, Haslam, E & Chambers, J 2014a, ‘Acoustic emission monitoring of a soil slope: comparisons with continuous deformation measurements’, Geotechnique Letters, vol. 4, no. 4, pp. 255-261.

© Copyright 2024, Australian Centre for Geomechanics (ACG), The University of Western Australia. All rights reserved.
View copyright/legal information
Please direct any queries or error reports to repository-acg@uwa.edu.au