Authors: Wesseloo, J; Cumming-Potvin, D; Potvin, Y; Jacobsz, SW; Kearsley, E

Open access courtesy of:

This paper is hosted with the kind permission of the Universidad de Chile, Eighth International Conference & Exhibition on Mass Mining, 2020.


Cite As:
Wesseloo, J, Cumming-Potvin, D, Potvin, Y, Jacobsz, SW & Kearsley, E 2020, 'Physical modelling to provide data-rich case studies for the verification and validation of numerical modelling predictions of cave mechanics problems', in R Castro, F Báez & K Suzuki (eds), MassMin 2020: Proceedings of the Eighth International Conference & Exhibition on Mass Mining, University of Chile, Santiago, pp. 462-477.

Download citation as:   ris   bibtex   endnote   text   Zotero


Abstract:
Due to the nature of cave mining, the industry needs to rely on indirect data and limited direct observation to investigate the mechanisms and processes of cave propagation. A collaborative project with the Australian Centre for Geomechanics, the University of Western Australia, and the Department of Civil Engineering, University of Pretoria was initiated to study these processes in the laboratory using geotechnical centrifuge modelling. The results of the first phase of this study postulated a discontinuous caving process with fracture banding occurring (Cumming-Potvin 2018; Cumming-Potvin et al. 2016a). A second phase of the project has been initiated under the sponsorship and in collaboration with Newcrest Mining Ltd. Several improvements to the experimental setup were introduced in the second phase with several further tests performed. The mechanism of cave propagation in the centrifuge is dominated by extension fracturing initiating in the cave crown and extending parallel to the cave back, with secondary shear fractures predominantly occurring on the side of the cave closer to the abutment.

References:
Arp, H., Griesbach, J.C., and Burns, J.P. 1982. Mapping in tropical forests:
a new approach using the laser APR. Photogrammetric Engineering and
Remote Sensing, Vol. 48, No. 1, pp. 91100.
Arp, H., Griesbach, J.C., and Burns, J.P. 1982. Mapping in tropical forests:
a new approach using the laser APR. Photogrammetric Engineering and
Remote Sensing, Vol. 48, No. 1, pp. 91100.
Brown, ET 2007, ‘Block Caving Geomechanics, Julius Kruttschnitt Mineral Research Centre’, The University of Queensland. Second edition. p. 516
Bucky, PB 1931, ‘Use of models for the study of mining problems’, American Institute of Mining and Metallurgical Engineers’, Technical Publication, no. 425, pp. 3-28.
Bucky, PB & Fentress, AL 1934, ‘Application of principles of similitude to design of mine workings’, American Institute of Mining and Metallurgical Engineers, Technical Publication, no. 529, pp. 3-20.
Bucky, PB, Solakian, AG & Baldin, LS 1935, ‘Centrifugal method of testing models’, Civil Engineering, vol. 5, no. 5, pp. 287-290.
Cumming-Potvin, D 2018, ‘An Extended Conceptual Model of Caving Mechanics’. PhD, The University of Western Australia.
Cumming-Potvin, D, Wesseloo, J, Jacobsz, SW & Kearsley, E 2016a, ‘Fracture banding in caving mines’, Journal of the Southern African Institute of Mining and Metallurgy, vol. 116, no. 8, pp. 753-761.
Cumming-Potvin, D, Wesseloo, J, Jacobsz, SW & Kearsley, E 2016b, ‘Results from Physical Models of Block Caving’, in C Carr & G Chitombo (eds), Proceedings of MassMin 2016, Sydney, New South Wales, Australia, Australian Institute of Mining and Metallurgy, Australia, pp. 329-340.
Duplancic, P & Brady, BH 1999, ‘Characterisation of Caving Mechanisms By Analysis of Seismicity And Rock Stress’, 9th ISRM Congress, 1999, Paris, France, International Society for Rock Mechanics and Rock Engineering.
Güney, MS, Tayfur, G, Bombar, G & Elci, S 2014, ‘Distorted Physical Model to Study Sudden Partial Dam Break Flows in an Urban Area’, Journal of Hydraulic Engineering, vol. 140, no. 11, pp. 05014006.
Hoek, E 1965, ‘The design of a centrifuge for the simulation of gravitational force fields in mine models’, Journal of the Southern African Institute of Mining and Metallurgy, vol. 65, no. 9, pp. 455-487.
Jacobsz, SW, Kearsley, EP, Cumming-Potvin, D & Wesseloo, J 2018, ‘Modelling cave mining in the geotechnical centrifuge’, in Andrew McNamara, Sam Divall, Richard Goodey, Neil Taylor, Sarah Stallebrass & J Panchal (eds), Physical Modeling in Geotechnics, The 9th International Conference on Physical Modelling in Geotechnics (ICPMG 2018), 2018, London, United Kingdom, CRC Press, pp. 809-814.
Kumcu, SY 2017, ‘Investigation of flow over spillway modeling and comparison between experimental data and CFD analysis’, KSCE Journal of Civil Engineering, vol. 21, no. 3, pp. 994-1003.
Lambe, TW 1973, ‘Predictions in Soil Engineering’, Géotechnique, vol. 23, no. 2, pp. 149-202.
Torres Mansilla, C 2018, ‘Numerical Modelling of Hydraulic Free Surface Flows and Scale Effects Associated with Physical Modelling’. University of Leeds.




© Copyright 2021, Australian Centre for Geomechanics (ACG), The University of Western Australia. All rights reserved.
Please direct any queries or error reports to repository-acg@uwa.edu.au