DOI https://doi.org/10.36487/ACG_repo/2465_05
Cite As:
Koupriantchik, D 2024, 'Trial of an alternative face de-stress pattern at Kanowna Belle mine', in P Andrieux & D Cumming-Potvin (eds),
Deep Mining 2024: Proceedings of the 10th International Conference on Deep and High Stress Mining, pp. 171-184,
https://doi.org/10.36487/ACG_repo/2465_05
Abstract:
De-stress blasting has been used in underground mining for several decades, aiming to reduce the risk of violent ejection of rock from the development face. Typically it includes boring a number of deep boreholes reaching the rock ahead of the next face of the development heading, charging and then firing the toe sections of these boreholes. The objective is to create sufficient blast damage in the rock forward of the face so that the accumulated strain energy there is dissipated. With this technique the bulk of the rock in the new face is fractured to a various degree of severity. Generally the de-stress holes are bored in addition to the standard face profile, and are most often fired before the main development firing. This method has some practical advantages as well as some significant shortcomings. An alternative de-stress technique dubbed ‘Iron Kurtain’ has been developed and trialled at the Kanowna Belle mine, aiming to simplify the practical aspects of the process and address the main deficiencies of the traditional scheme. This paper describes the de-stress concept of the Iron Kurtain method, and discusses the observations made during the trial and its main results.
Keywords: de-stress, blasting, seismicity, rockburst
References:
Drover, C & Villaescusa, E 2020, ‘Kanowna Belle 9215 Seismicity Results, February to October 2020’, paper presented at Kanowna Belle, Kalgoorlie.
Drover, C, Villaescusa, E & Onederra, I 2018, ‘Face destressing blast design for hard rock tunnelling at great depth’, Tunnelling and Underground Space Technology, no. 80, pp. 257–268,
Hill, FG & Plewman, RP 1958, ‘De-stressing: a means of ameliorating rockburst conditions, Part II: Implementing de-stressing with a discussion on the results so far obtained’, Journal of the South African Institute of Mining and Metallurgy, vol. 59, no. 1, pp. 68–69.
Hustrulid, W 1999, Blasting Principles for Open Pit Mining, Volume 1: General Design Concepts, A.A. Balkema, Rotterdam.
Iverson, SR, Hustrulid, WA & Johnson, JC 2013, A New Perimeter Control Blast Design Concept for Underground Metal/Nonmetal Drifting Applications, U.S. Department of Health and Human Services, Public Health Service, Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health, Spokane.
Kanowna Belle 2022, Ground Control Management Plan, October 2022.
Koupriantchik, D & Talebi, R 2021 ‘Assessment of potential seismic risk in 9245 level from firings in 9215 E 40-45 stope’, Kanowna Belle internal report.
Morkel, IG 2013, Preconditioning of the 9145 OD22E Heading, Kanowna Belle.
Roux, AJA, Leeman, ER & Denkhaus, HG 1957, ‘Destressing: a means of ameliorating rockburst conditions. Part I: the concept of distressing and the results obtained from its applications’, Journal of the South African Institute of Mining and Metallurgy, vol. 57, pp. 101–119.
Talebi, R 2021, Geotechnical Review of Mining in 9215 & 9115, Kanowna Belle internal report.
Varden, R 2011, GM24 9145 FWDr E Management Plan, 22 June, Kanowna Belle.