Seismic risk control measure from passive to active through hydraulic fracturing
|
Authors: Duan, W; Morkel, IG; Cumming-Potvin, D Open access courtesy of:
|
DOI https://doi.org/10.36487/ACG_repo/2465_81
Cite As:
Duan, W, Morkel, IG & Cumming-Potvin, D 2024, 'Seismic risk control measure from passive to active through hydraulic fracturing', in P Andrieux & D Cumming-Potvin (eds), Deep Mining 2024: Proceedings of the 10th International Conference on Deep and High Stress Mining, Australian Centre for Geomechanics, Perth, pp. 1237-1252, https://doi.org/10.36487/ACG_repo/2465_81
Abstract:
Significant advancement in seismic hazard understanding and risk management has been made in recent decades through various research projects worldwide. However, rockburst occurrence continues to plague the underground mining industry and remains a significant challenge. As the industry becomes more mature in understanding and quantifying seismic hazard, more effort will be devoted to the development of control measures. Seismic risk control measures currently applied by the industry tend to be passive in nature and are often associated with significant direct or indirect cost, i.e. ground support, exposure management and mine design changes. Hydraulic fracturing, a technique frequently used in caving operations, has shown promising effectiveness at mitigating large-magnitude seismic events. However, several technical challenges and uncertainties remain which are hindering a wider adoption of the technique within the underground mining industry outside of caving mines. This paper summarises some of the technical challenges and uncertainties associated with the hydraulic fracturing technique. A solution is then proposed to address these obstacles to explore the full potential of hydraulic fracturing for mitigating large seismic event occurrence and associated hazard.
Keywords: seismic risk, rockburst mitigation, hydraulic fracturing, rock mass preconditioning
References:
Amorer, G, Duffield, S, De Ross, J & Viegas, G 2022, ‘Surface hydraulic fracturing trial at Cadia East’, in Y Potvin (ed.), Caving 2022: Proceedings of the Fifth International Conference on Block and Sublevel Caving, Australian Centre for Geomechanics, Perth, pp. 1173–1188,
Ashry, I, Mao, Y, Wang, Biwei, Hveding, F, Bukhamsin, AY, Ng, TK & Ooi, BS 2022, ‘A review of distributed fiber-optic sensing in the oil and gas industry’, Journal of Lightwave Technology, vol. 40, no. 5, pp. 1407–1431,
abstract.cfm?uri=jlt-40-5-1407
Board, M, Rorke, T, Williams, G & Gay, N 1992, ‘Fluid injection for rockburst control in deep mining’, ARMA US Rock Mechanics/Geomechanics Symposium, A.A. Balkema, Rotterdam, pp. 111–120.
Boeg-Jensen, PK, Jonsson, K & Jeffrey, RG 2017, ‘Hydraulic fracturing trial layout and approach to mitigate the seismic hazard at LKAB’s mines in Kiruna and Malmberget’, 9th International Symposium on Rockburts and Seismicity in Mines, pp. 1–6.
Boreham, M, Green, S & Finn, D 2009, Newcrest Mining Limited Confidential Report No. 721-224-AL-REP-2001.
Branagan, PT, Peterson, RE, Warpinski, NR, Wright, TB 1996, ‘Characterization of a remotely intersected set of hydraulic fractures: results of intersection well no. 1-B, GRI/DOE multi-site project’, presented at the SPE Annual Technical Conference and Exhibition, Denver, 6–9 October, SPE-36452-MS,
Catalan, AJ 2014, Implementation and Assessment of Intensive Preconditioning for Cave Mining Applications, PhD thesis, The University of Queensland, Brisbane.
Counter, DB 2014, ‘Kidd Mine – dealing with the issues of deep and high stress mining – past, present and future’, in M Hudyma
& Y Potvin (eds), Deep Mining 2014: Proceedings of the Seventh International Conference on Deep and High Stress Mining, Australian Centre for Geomechanics, Perth, pp. 3–22,
Dahner, C, Dineva, S & Jonsson, K 2022, ‘Overview of the hydraulic fracturing results from a production area in Kiirunavaara mine’, Proceedings of the 10th International Symposium on Rockbursts and Seismicity in Mines, Society for Mining, Metallurgy & Exploration, Englewood.
Diamond, WP & Oyler, DC 1987, ‘Effects of stimulation treatments on coalbeds and surrounding strata: evidence from underground observations’, Report of Investigations 9083, NTIS No. PB87-231858, Bureau of Mines, US Department of the Interior,
du Toit, HJ, Goldswain, G & Olivier, G 2022, ‘Can DAS be used to monitor mining induced seismicity’, International Journal of Rock Mechanics and Mining Sciences, vol. 155,
Estrada, E, Roberts, N, Weijers, L, Riebel, T & Logan, S 2009, ‘Fracture mapping in the San Juan Basin, New Mexico’, SPE Annual Technical Conference and Exhibition, Society of Petroleum Engineers, Richardson,
Fisher, MK, Wright, CA, Davidson, BM, Steinsberger, NP, Buckler, WS, Goodwin, A, Fielder, EO 2002, ‘Integrating fracture mapping technologies to optimize stimulations in the Barnett Shale’, presented at the SPE Annual Technical Conference and Exhibition, San Antonio, 29 September – 2 October, SPE-77441-MS,
Furlong, J & Anderson, Z 2022, ‘Distributed acoustic sensing/distributed strain sensing technology and its applications for block cave progress monitoring, rock mass preconditioning, and imaging’, in Y Potvin (ed.), Caving 2022, Australian Centre for Geomechanics, Perth, pp. 991–1006,
Ghazvinian, E, Damjanac, B, Lorig, L, Cavieres, P & Madrid, A 2020, ‘Back analysis of the effect of hydraulic fracturing preconditioning on mining-induced seismicity at the main access of New Mine Level project, CODELCO Chile - El Teniente Division’, in R Castro, F Báez & K Suzuki (eds), MassMin 2020: Proceedings of the Eighth International Conference & Exhibition on Mass Mining, University of Chile, Santiago, pp. 249–263,
Hudyma, MR, Heal, D & Mikula, P 2003, ‘Seismic monitoring in mines – old technology – new applications’, 1st Australasian Ground Control in Mining Conference, pp. 201–218.
Jeffrey, R 2007, Hydraulic Fracturing Trial - Ridgeway Deeps Preconditioning, CSIRO Petroleum Confidential Report No. 07-011.
Jeffrey, RG, Brynes, RP, Lynch, PJ & Ling, DJ 1992, ‘An analysis of hydraulic fracture and mineback data for a treatment in the German Creek Coal Seam’, presented at the SPE Rocky Mountain Regional Meeting, Casper, 18–21 May, SPE-24362-MS,
Jeffrey, RG, Bunger, AP, Lecampion, B, Zhang, X, Chen, ZR, van As, A, ... Mainguy, M 2009, ‘Measuring hydraulic fracture growth in naturally fractured rock’, SPE Annual Technical Conference and Exhibition, Society of Petroleum Engineers, Richardson.
Jonsson, K & Martinsson, J 2018, ‘Evaluating the effect on seismicity of a hydraulic fracturing trial using Bayesian data analysis’,
in Y Potvin & J Jakubec (eds), Caving 2018: Proceedings of the Fourth International Symposium on Block and Sublevel Caving, Australian Centre for Geomechanics, Perth, pp. 451–658,
Kaiser, PK, Valley, B & Dusseault, MB 2013, ‘Hydraulic fracturing mine back trials — design rationale and project status’, in R Jeffrey, J Mclennan & A Bunger (eds), International Conference for Effective and Sustainable Hydraulic Fracturing, pp. 877–891,
Lett, J 2022, ‘The role of pre-conditioning in mitigating seismic hazards – an innovative method for future caving operations’, Proceedings of the 10th International Symposium on Rockbursts and Seismicity in Mines, Society of Petroleum Engineers, Richardson.
Ma, Y, Eaton, D, Igonin, N & Wang, C 2023, ‘Machine learning-assisted processing workflow for multi-fiber DAS microseismic data’, Frontiers in Earth Science, vol. 11,
MacDonald, D 2023, Kalgoorlie's Raleigh Gold Mine to Close due to Damage Caused by Underground Blasting,
Malovichko, DA 2017, ‘Assessment and testing of seismic hazard for planned mining sequences’, in J Wesseloo (ed.), Deep Mining 2017: Proceedings of the Eighth International Conference on Deep and High Stress Mining, Australian Centre for Geomechanics, Perth, pp. 61–77,
Molina, R, Cerrutti, C, Henriquez, J, Morales, R & Apablaza, R 2008, ‘Preconditioning implementation on rock bulks in Codelco Chile and its results’, in MassMin, Luleå University of Technology, Lulea.
Morales, RF, Henriquez, JO, Molina, RE, Araneda, OA & Rojas, EG 2007, ‘Rock Preconditioning Application in Virgin Caving Condition in a Panel Caving Mine, CODELCO Chile El Teniente Division’, in Y Potvin (ed.), Deep Mining, Australian Centre for Geomechanics, Perth, Australia, pp. 111–120,
Ou, C, Liang, C, Li, Z, Luo, L & Yang, X 2022, ‘3D visualization of hydraulic fractures using micro-seismic monitoring: methodology and application’, Petroleum, vol. 8, no. 1, pp. 92–101,
Ortlepp, WD 2005, ‘A review of the contribution to the understanding and control of mine rockbursts’, in Y Potvin & M Hudyma (eds), Proceedings of the Sixth International Symposium on Rockburst and Seismicity in Mines, Australian Centre for Geomechanics, Perth, pp. 3–20,
Potvin, Y, Morkel, G, Tierney, S, Woodward, K & Cuello, D 2019, ‘Seismic risk management practices in metalliferous mines’, Proceedings of the 10th International Symposium on Rockbursts and Seismicity in Mines, The Southern African Institute of Mining and Metallurgy, pp. 123–132,
Potvin, Y & Wesseloo, J 2013a, ‘Towards an understanding of dynamic demand on ground support’, Journal of the Southern African Institute of Mining and Metallurgy, vol. 113, no. 12, pp. 913–922.
Potvin, Y & Wesseloo, J 2013b, ‘Improving seismic risk management in hardrock mines’, Proceedings of the Eighth International Symposium on Rockbursts and Seismicity in Mines, vol. 1, Geophysical Survey of Russian Academy of Sciences, Obninsk, pp. 371–386.
Ortlepp, WD 2005, ‘RaSiM comes of age—a review of the contribution to the understanding and control of mine rockbursts’,
in Y Potvin & M Hudyma (eds), RaSiM6: Proceedings of the Sixth International Symposium on Rockburst and Seismicity in Mines Proceedings, Australian Centre for Geomechanics, Perth, pp. 3–20,
Rojas, E & Landeros, P 2017, ‘Hydraulic fracturing applied to tunnels development at El Teniente mine’, Proceedings of the 9th International Symposium on Rockbursts and Seismicity in Mines, University of Chile, Santiago, pp. 244–250.
Rojas, E & Landeros, P 2022, ‘Rockburst risk management to make tunnel construction feasible in high stress environments, Codelco El Teniente’, in Proceedings of the 10th International Symposium on Rockbursts and Seismicity in Mines, Society of Petroleum Engineers, Richardson.
Roux, AJA, Leeman, ER & Denkhaus, HG 1957, ‘De-stressing: a means of ameliorating rockburts conditioning. part I: the conception of de-stressing and the results obtained from its application’, Journal of the Southern African Institute of Mining and Metallurgy, pp. 101–119.
Ryder, JA 1988, ‘Excess shear stress in the assessment of geologically hazardous situations’, Journal of the Southern African Institute of Mining and Metallurgy, vol. 88, no. 1, pp. 27–40.
Staněk, F, Jin, G & Simmons, J 2022, ‘Fracture imaging using DAS-recorded microseismic events’, Frontiers in Earth Science, vol. 10,
Svartsjaern, M, Rentzelos, T, Shekhar, G, Swedberg, E, Boskovic, M & Hebert, Y 2022, ‘Controlled reopening of the Kiirunavaara production block 22 after a 4.2 magnitude event’, in Y Potvin (ed.), Caving 2022: Proceedings of the Fifth International Conference on Block and Sublevel Caving, Australian Centre for Geomechanics, Perth, pp. 685–698,
10.36487/ACG_repo/2205_47
Tierney, SR & Morkel, IG 2017, ‘The optimisation and comparison of re-entry assessment methodologies for use in seismically active mines’, in J Wesseloo (ed.), Deep Mining 2017: Proceedings of the Eighth International Conference on Deep and High Stress Mining, Australian Centre for Geomechanics, Perth, pp. 183–196,
van As, A & Jeffrey, R 2002, ‘Hydraulic fracture growth in naturally fractured rock: mine through mapping and analysis’, Proceedings of the 5th North American Rock Mechanics Symposium, University of Toronto Press, Toronto.
van As, A & Jeffrey, R.G. 2000, ‘Hydraulic Fracturing as a Cave Inducement Technique at Northparkes Mines’, in MassMin2000, AusIMM, Brisbane.
van der Baan, M, Eaton, D & Dusseault, M 2013, ‘Microseismic monitoring developments in hydraulic fracture stimulation’,
in AP Bunger, J McLennan & R Jeffrey (eds), Effective and Sustainable Hydraulic Fracturing, InTech, London.
Warpinski, NR 2020, ‘Chapter 3: rock mechanics and fracture geometry’, in JL Miskimins (ed.), Hydraulic Fracturing: Fundamentals and Advancements, Society of Petroleum Engineers, Richardson.
Warpinski, NR, Lorenz, JC, Branagan, P, Myal, FR & Gall, BL 1993, ‘Examination of a cored hydraulic fracture in a deep gas well’,
Warpinski, NR & Teufel, LW 1987, ‘Influence of geologic discontinuities on hydraulic fracture propagation’, Journal of Petroleum Technology, vol. 39, no. 2, pp. 209–220,
Wright, C 1998, ‘Tiltmeter fracture mapping: from the surface and now downhole’, Petroleum Engineer International, vol. 71, no. 1.
Zhang, X, Jeffrey, RG & Thiercelin, M 2007, ‘Effects of frictional geological discontinuities on hydraulic fracture propagation’, paper presented at the SPE Hydraulic Fracturing Technology Conference, College Station, 29–31 January, SPE-106111-MS, .
© Copyright 2024, Australian Centre for Geomechanics (ACG), The University of Western Australia. All rights reserved.
View copyright/legal information
Please direct any queries or error reports to repository-acg@uwa.edu.au
View copyright/legal information
Please direct any queries or error reports to repository-acg@uwa.edu.au