Estimation of rock wall closure generated by stope excavation underlying the sill mat made from cemented backfill

Authors: Fan, C; Li, L; Yang, X; Liu, G; Guo, L

Open access courtesy of:

DOI https://doi.org/10.36487/ACG_repo/2555_31

Cite As:
Fan, C, Li, L, Yang, X, Liu, G & Guo, L 2025, 'Estimation of rock wall closure generated by stope excavation underlying the sill mat made from cemented backfill', in AB Fourie, A Copeland, V Daigle & C MacRobert (eds), Paste 2025: Proceedings of the 27th International Conference on Paste, Thickened and Filtered Tailings, Australian Centre for Geomechanics, Perth, pp. 441-454, https://doi.org/10.36487/ACG_repo/2555_31

Download citation as:   ris   bibtex   endnote   text   Zotero


Abstract:
Underhand cut-and-fill mining is necessary when rock walls and the orebody are of poor quality or when rock bursts are of high concern. Sill mats made from cemented paste backfill must be constructed before excavating the underlying stope. Large rock wall closure associated with the excavation underneath can then be expected. This phenomenon has already been confirmed by numerical modelling and field observations. The rock wall closure can then affect the stability of the base-exposed sill mat. Thus, it is a critical issue to determine the rock wall closure induced by the excavation underneath the cemented backfill (i.e. sill mat). In this study an analytical solution for determining the rock wall closure associated with excavation underneath is first presented. After that the proposed analytical solution is validated by numerical results by considering different stope geometries, mine depths, lateral pressure coefficients, and the mechanical properties of the rock mass and sill mat. The proposed solution paves the way for estimating the required strength of the sill mats subjected to significant wall closures.

Keywords: mining with backfill, paste backfill, sill mat, wall closure, analytical solution

References:
Aubertin, M, Li, L, Arnoldi, S, Belem, T, Bussière, B, Benzaazoua, M & Simon, R 2003, ‘Interaction between backfill and rock mass in narrow stopes’, Soil and Rock America, vol. 1, pp. 1157–1164.
Darling, P 2011, SME Mining Engineering Handbook, 3rd edn, Society for Mining, Metallurgy, and Exploration, Englewood.
Donovan, J, Dawson, J & Bawden, WF 2007, ‘David Bell mine underhand cut and fill sill mat test’, Proceedings of the 9th International Symposium on Mining With Backfill, Canadian Institute of Mining, Metallurgy and Petroleum, Westmount.
Falaknaz, N, Aubertin, M & Li, L 2015a, ‘Evaluation of the stress state in two adjacent backfilled stopes within an elasto-plastic rock mass’, Geotechnical and Geological Engineering, vol. 42.
Falaknaz, N, Aubertin, M & Li, L 2015b, ‘Numerical analyses of the stress state in two neighboring stopes excavated and backfilled in sequence’, International Journal of Geomechanics, vol. 15.
Falaknaz, N, Aubertin, M & Li, L 2015c, ‘Numerical investigation of the geomechanical response of adjacent backfilled stopes’, Canadian Geotechnical Journal, vol. 52, pp. 1507–1525.
Flamant, A 1892, ‘Sur la répartition des pressions dans un solide rectangulaire chargé transversalement’ (‘The distribution of pressures in a rectangular solid subjected to transverse loading’), CR Acad Sci Paris, vol. 114, pp. 1465–1468.
Grabinsky, MW, Jafari, M & Pan, A 2022, ‘Cemented paste backfill (CPB) material properties for undercut analysis’, Mining, vol. 2, pp. 103–122.
Grabinsky, MW, Thompson, B, Jafari, M, Counter, DB & Bawden, WF 2024, ‘Understanding rock mass–backfill interaction in
support of deep and high-stress mining’, in P Andrieux & D Cumming-Potvin (eds), Deep Mining 2024: Proceedings of the
10th International Conference on Deep and High Stress Mining, Australian Centre for Geomechanics, Perth,
pp. 1349–1364, 
Hughes, P 2014, Design Guidelines: Underhand Cut and Fill Cemented Paste Backfill Sill Beams, PhD Thesis, The University of British Columbia, Vancouver.
Jahanbakhshzadeh, A, Aubertin, M & Li, L 2018, ‘Analysis of the stress distribution in inclined backfilled stopes using closed-form solutions and numerical simulations’, Geotechnical and Geological Engineering, vol. 36, pp. 1011–1036.
Keita, AMT, Jahanbakhshzadeh, A & Li, L 2021a, ‘Numerical analysis of the failure mechanisms of sill mats made of cemented backfill’, International Journal of Geotechnical Engineering, pp. 1–13.
Keita, AMT, Jahanbakhshzadeh, A & Li, L 2021b, ‘Numerical analysis of the stability of arched sill mats made of cemented backfill’, International Journal of Rock Mechanics and Mining Sciences, vol. 140.
Li, L 2014a, ‘Analytical solution for determining the required strength of a side-exposed mine backfill containing a plug’, Canadian Geotechnical Journal, vol. 51, pp. 508–519.
Li, L 2014b, ‘Generalized solution for mining backfill design’, International Journal of Geomechanics, vol. 14, pp. 1–11.
Li, L 2022, ‘Special issue on numerical modeling in civil and mining geotechnical engineering’, Processes, vol. 10, no.8.
Li, L & Aubertin, M 2008, ‘An improved analytical solution to estimate the stress state in subvertical backfilled stopes’, Canadian Geotechnical Journal, vol. 45, pp. 1487–1496.
Li, L & Aubertin, M 2012, ‘A modified solution to assess the required strength of exposed backfill in mine stopes’, Canadian Geotechnical Journal, vol. 49, pp. 994–1002.
Li, L & Aubertin, M 2014, ‘An improved method to assess the required strength of cemented backfill in underground stopes with an open face’, International Journal of Mining Science and Technology, vol. 24, pp. 549–558.
Li, L, Aubertin, M, Simon, R, Bussière, B & Belem, T 2003, ‘Modeling arching effects in narrow backfilled stopes with FLAC’, FLAC and Numerical Modeling in Geomechanics, pp. 211–219.
Li, L, Aubertin, M & Tikou, B 2005, ‘Formulation of a three dimensional analytical solution to evaluate stresses in backfilled vertical narrow openings’, Canadian Geotechnical Journal, vol. 42, pp. 1705–1717.
Liu, GS, Li, L, Yang, XC & Guo, LJ 2016a, ‘Numerical analysis of stress distribution in backfilled stopes considering interfaces between the backfill and rock walls’, International Journal of Geomechanics, vol. 17.
Liu, GS, Li, L, Yang, XC & Guo, LJ 2016b, ‘A numerical analysis of the stress distribution in backfilled stopes considering nonplanar interfaces between the backfill and rock walls’, International Journal of Geotechnical Engineering, vol. 10, pp. 271–282.
Liu, GS, Li, L, Yang, XC & Guo, LJ 2016c, ‘Stability analyses of vertically exposed cemented backfill: A revisit to Mitchell's physical model tests’, International Journal of Mining Science and Technology, vol. 26, pp. 1135–1144.
Liu, GS, Li, L, Yang, XC & Guo, LJ 2018, ‘Required strength estimation of a cemented backfill with the front wall exposed and back wall pressured’, International Journal of Mining and Mineral Engineering, vol. 9, pp. 1–20.
Mitchell, RJ 1991, ‘Sill mat evaluation using centrifuge models’, Mining Science and Technology, vol. 13, pp. 301–313.
Mitchell, RJ, Olsen, RS & Smith, JD 1982, ‘Model studies on cemented tailings used in mine backfill’, Canadian Geotechnical Journal, vol. 19, pp. 14–28.
Pagé, P, Li, L, Yang, PY & Simon, R 2019, ‘Numerical investigation of the stability of a base-exposed sill mat made of cemented backfill’, International Journal of Rock Mechanics and Mining Sciences, vol. 114, pp. 195–207.
Pakalnis, R 2015, ‘Empirical design methods in practice’, in Y Potvin (ed.), Design Methods 2015: Proceedings of the International Seminar on Design Methods in Underground Mining, Australian Centre for Geomechanics, Perth, pp. 37–56,
Pakalnis, R, Caceres, C, Clapp, K, Morin, M, Brady, T, Williams, T, Blake, W & MacLaughlin, M 2005, ‘Design spans-underhand cut and fill mining’, Proceedings of the 107th CIM-AGM, Canadian Institute of Mining, Metallurgy and Petroleum, Westmount.
Raffaldi, MJ, Seymour, JB, Richardson, J, Zahl, E & Board, M 2019, ‘Cemented paste backfill geomechanics at a narrow-vein underhand cut-and-fill mine’, Rock Mechanics and Rock Engineering, vol. 52, pp. 4925–4940.
Sadd, MH 2009, Elasticity Theory, Applications, and Numerics, 3rd edn, Academic Press, Burlington.
Salamon, MDG 1968, ‘Two-dimensional treatment of problems arising from mining tabular deposits in isotropic or transversely isotropic ground’, International Journal of Rock Mechanics and Mining Sciences, vol. 5, pp. 159–185.
Seymour, JB, Martin, LA, Raffaldi, MJ, Warren, SN & Sandbak, LA 2019, ‘Long-term stability of a 13.7×30.5 m (45×100 ft) undercut span beneath cemented rockfill at the Turquoise Ridge mine, Nevada’, Rock Mechanics and Rock Engineering, vol. 52,
pp. 4907–4923.
Seymour, JB, Raffaldi, MJ, Abraham, H, Johnson, JC & Zahl, EG 2017, ‘Monitoring the in situ performance of cemented paste backfill at the Lucky Friday mine’, Proceedings of the 12th International Conference on Mining with Backfill 2017, Society for Mining, Metallurgy, and Exploration, Englewood, pp. 19–22.
Sobhi, MA & Li, L 2017, ‘Numerical investigation of the stresses in backfilled stopes overlying a sill mat’, Journal of Rock Mechanics and Geotechnical Engineering, vol. 9, pp. 490–501.
Stone, DMR 1993, ‘The optimization of mix designs for cemented rockfill’, Minefill 93, The South African Institute of Mining and Metallurgy, Rosebank, pp. 249–253.
Wang, RF & Li, L 2022, ‘Time-dependent stability analyses of side-exposed backfill considering creep of surrounding rock mass’, Rock Mechanics and Rock Engineering, vol. 55, pp. 2255–2279.
Wang, RF, Zeng, FT & Li, L 2021, ‘Stability analyses of side-exposed backfill considering mine depth and extraction of adjacent stope’, International Journal of Rock Mechanics and Mining Sciences, vol. 142.
Yang, PY, Li, L & Aubertin, M 2017, ‘A new solution to assess the required strength of mine backfill with a vertical exposure’, International Journal of Geomechanics, vol. 17, no. 10.




© Copyright 2025, Australian Centre for Geomechanics (ACG), The University of Western Australia. All rights reserved.
View copyright/legal information
Please direct any queries or error reports to repository-acg@uwa.edu.au