Sensitivity analysis of tailings disposal and drying cycles in a bauxite tailings dam

Authors: Feijó, VS; Rainho do Sacramento França, T; Santos Fabre, J; de Paula Ferreira, S; de Morais Kelly Lima Bittar, L; Freire Neto, JP

Open access courtesy of:

DOI https://doi.org/10.36487/ACG_repo/2555_41

Cite As:
Feijó, VS, Rainho do Sacramento França, T, Santos Fabre, J, de Paula Ferreira, S, de Morais Kelly Lima Bittar, L & Freire Neto, JP 2025, 'Sensitivity analysis of tailings disposal and drying cycles in a bauxite tailings dam', in AB Fourie, A Copeland, V Daigle & C MacRobert (eds), Paste 2025: Proceedings of the 27th International Conference on Paste, Thickened and Filtered Tailings, Australian Centre for Geomechanics, Perth, pp. 577-588, https://doi.org/10.36487/ACG_repo/2555_41

Download citation as:   ris   bibtex   endnote   text   Zotero


Abstract:
This study aims to evaluate opportunities for improvement in the disposal and drying cycles adopted in the operation of a storage reservoir for thickened tailings from bauxite processing that is part of a project located in the northern region of Brazil. The reservoir is divided into quadrants and, currently, the disposal occurs in 0.5 m-thick sequential discharge layers of tailings, with approximately 34% solids content by weight (SC). In the routine operation of the structure the subsequent layer is released when the lower layer reaches an SC of around 60%. After occupying the useful volume of the quadrant, mechanical excavation of the disposed dry tailings is carried out. This is directed towards the closure of the mining areas of the project, freeing up space for a new cycle of operation at the structure. The work proposes a sensitivity analysis of the expected drying curve through analytical equations and the assistance of numerical tools for evaluation of consolidation and drying. Fifteen combined variations will be performed, including different SC (between 30% and 38%) and five different layer thicknesses. Such analyses will make it possible to understand the drying times necessary to obtain the minimum SC for mechanical excavation and, consequently, will allow an evaluation of the complete operating cycle of the reservoir.

Keywords: tailings dam, bauxite tailings, disposal and drying cycle, consolidation, sensitivity analysis, optimisation

References:
Abu-Hejleh, AN 1993, Desiccation Theory for Soft Soils, PhD thesis, University of Colorado, Boulder.
Abu-Hejleh, AN & Znidarcic, D 1995, ‘Desiccation theory for soft cohesive soils’, Journal of Geotechnical Engineering, vol. 121, no. 6, pp. 493–502.
Almeida, FE 2004, Numerical Analysis of the Drying Process of a Fine Tailings From Iron Mining, Master’s thesis, Federal University of Ouro Preto, Ouro Preto.
Foster, M, Fell, R & Spannagle, M 2000, 'The statistics of embankment dam failures and accidents’, Canadian Geotechnical Journal, vol. 37, no. 5, pp. 1000–1024.
Fredlund, DG, Rahardjo, H & Freire, EG 1996, Soil Mechanics for Unsaturated Soils, Wiley, New York.
Gibson, RE, England, GL & Hussey, MJL 1967, ‘The theory of one-dimensional consolidation of saturated clays: I. Finite nonlinear consolidation of thin homogeneous layers’, Géotechnique, vol. 17, no. 3, pp. 261–273.
Gibson, RE, Schiffman, RL & Cargill, KW 1981, ‘The theory of one-dimensional consolidation of saturated clays: II. Finite nonlinear consolidation of thick homogeneous layers’, Canadian Geotechnical Journal, vol. 18, pp. 280–293.
Marinho, CA 2024, Evaluation of the Disposal and Drying Processes of a Bauxite Washing Tailings, Master’s thesis, Pontifical Catholic University of Rio de Janeiro, Rio de Janeiro.
Morris, PH, Graham, J & Williams, DJ 1992, ‘Cracking in drying soils’, Canadian Geotechnical Journal, vol. 29, no. 2, pp. 263–277.
Oliveira Filho, WL 1998, Verification of desiccation theory for soft soils, PhD thesis, University of Colorado, Boulder.
Peng, M & Zhang, LM 2012, ‘Breaching parameters of landslide dams’, Landslides, vol. 9, no. 1, pp. 13–31.
Rodríguez, R, Sanchez, M, Ledesma, A & Lloret, A 2007, ‘Experimental and numerical analysis of desiccation of a mining waste’, Canadian Geotechnical Journal, vol. 44, no. 6, pp. 644–658.
Silva, DR 2003, ‘Experimental studies of the drying process of a fine mining tailings’, Revista Escola de Minas, Universidade Federal de Ouro Preto, Ouro Preto, pp. 261–265.
Take, WA 2003, The Influence of Seasonal Moisture Cycles on Clay Slopes, PhD thesis, University of Cambridge, Cambridge.
Talbot, JR & Deal, CE 1993, ‘Rehabilitation of cracked embankment dams’, Geotechnical Practice in Dam Rehabilitation: Proceedings of the Specialty Conference, American Society Of Civil Engineers, New York, pp. 267–283.
Tang, C S, Zhu, C, Cheng, Q, Zheng, H, Xu, J, Tian, B & Xi, B 2021, ‘Desiccation cracking of soils: a review of investigation approaches, underlying mechanism, and influencing factors’, Earth-Science Reviews, vol. 216,
j.earscirev.2021.103586
Terzaghi, K 1943, Theoretical Soil Mechanics, Wiley, New York.
Xu, J-J, Zhang, H, Tang, CS, Cheng, Q, Liu, B & Shi, B 2020, ‘Automatic soil desiccation crack recognition using deep learning’, Géotechnique, vol. 72, no. 4, 
Yao, TC, Oliveira Filho, WL, Cai, XC & Znidarcic, D 2002, ‘Numerical solution for consolidation and desiccation of soft soils’, International Journal for Numerical and Analytical Methods in Geomechanics, vol. 26, pp. 139–161.
Yao, TC & Znidarcic, D 1997, User's Manual for Computer Program CONDES00, University of Colorado, Boulder, Colorado.




© Copyright 2025, Australian Centre for Geomechanics (ACG), The University of Western Australia. All rights reserved.
View copyright/legal information
Please direct any queries or error reports to repository-acg@uwa.edu.au