Global benchmarking of block caves: a super cave update
|
Authors: Mawdesley, C; Altankhuu, B Open access courtesy of:
|
DOI https://doi.org/10.36487/ACG_repo/2645_03
Cite As:
Mawdesley, C & Altankhuu, B 2026, 'Global benchmarking of block caves: a super cave update', in A van As, D Cumming-Potvin & J Wesseloo (eds), Caving 2026: Proceedings of the Sixth International Conference on Block and Sublevel Caving, Australian Centre for Geomechanics, Perth, pp. 1-15, https://doi.org/10.36487/ACG_repo/2645_03
Abstract:
Over the past two decades, block caving has been applied at greater depths and to significantly taller draw columns and with a substantial increase in scale and productivity. Historic benchmarking does not capture the operational characteristics of the deeper, taller caves that reached peak production after 2003, nor the first cohort of super caves (caves with lift heights >300 m and production rates >70 ktpd) that were at the project stage 20 years ago. There are currently 7 super caves (i.e. design capacity >70 ktpd) either at peak production, in ramp-up or forecast to reach peak production in the early to mid-2030s. Rio Tinto recently undertook a benchmarking analysis of global block caves using only public sources to supplement in-house caving experience and capture developments in these deeper, taller caves over the past 20 years. This paper presents the results of the benchmarking study and summarises the current state of block caving, with emphasis on the super caves and deep block caves commissioned since 2003. Hugo North Lift 1 in Oyu Tolgoi, Mongolia, provides the primary reference point for scale and depth, with the focus on deep, large caves. However, since the number of super caves is limited, the benchmarking also drew explicitly on smaller, deep block caves of comparable footprint scale and production to Hugo North Panel 0, the first cave mined at Oyu Tolgoi. All information presented in this paper, including for Oyu Tolgoi, is publicly available.
Keywords: benchmarking, block cave, super cave, caving, Oyu Tolgoi, Hugo North
References:
Beard, D & Brannon, C 2018, ‘Grasberg Block Cave mine: cave planning and undercut sequencing’, in Y Potvin & J Jakubec (eds), Caving 2018: Proceedings of the Fourth International Symposium on Block and Sublevel Caving, Australian Centre for Geomechanics, Perth, pp. 373–384,
Beard, D, Lara Moran, F, Brannon, C & Rumbino, H 2024, ‘Update on the Grasberg and Kucing Liar block cave mines’, in D Johansson & H Schunnesson (eds), MassMin 2024: Proceedings of the International Conference & Exhibition on Mass Mining, Luleå University of Technology, Luleå, pp. 1286–1297,
Brown, ET 2007, Block Caving Geomechanics: International Caving Study 1997–2004, 2nd edn, Julius Kruttschnitt Mineral Research Centre, The University of Queensland, Brisbane
Callahan, MF & Gillon, J 2012, ‘An update on Henderson’s 7,210 production level’, MassMin 2012: Proceedings of the International Conference on Mass Mining, Canadian Institute of Mining, Metallurgy and Petroleum, Sudbury,
Cambero, F 2023, ‘Chile’s Codelco produced less copper in 2022, chairman says’, Reuters, viewed 28 January 2024,
Casten, T, Johnson, M, Zimmer, C & Mahayasa, M 2020, ‘PT Freeport Indonesia – The transition to underground production’, in
R Castro, F Báez & K Suzuki (eds), MassMin 2020: Proceedings of the Eighth International Conference & Exhibition on Mass Mining, University of Chile, Santiago, pp. 23–38,
Castro, R & Cuello, D 2018, ‘Hang-up analysis and modelling for Cadia East PC1-S1 and PC2-S1’, in Y Potvin & J Jakubec (eds), Caving 2018: Proceedings of the Fourth International Symposium on Block and Sublevel Caving, Australian Centre for Geomechanics, Perth, pp. 233–246,
Codelco 2025, Codelco carries out first blasting operation at El Teniente’s Andes Norte project, press release, viewed March 2026,
Cossins-Smith, A 2023, ‘Newcrest slows mining at Cadia site after dust pollution warnings’, Mining Technology, viewed 28 January 2024, www.mining-technology.com/news/newcrest-slows-production-amid-dust-pollution-probe/
Cuello, D & Newcombe, G 2018, ‘Key geotechnical knowledge and practical mine planning guidelines in deep, high-stress, hard rock conditions for block and panel cave mining’, in Y Potvin & J Jakubec (eds), Caving 2018: Proceedings of the Fourth International Symposium on Block and Sublevel Caving, Australian Centre for Geomechanics, Perth, pp. 17–36,
Diering, T, Ngidi, SN, Bezuidenhout, JJ & Paetzold, HD 2018, ‘Palabora Lift 1 block cave: understanding the grade behaviour’, in Y Potvin & J Jakubec (eds), Caving 2018: Proceedings of the Fourth International Symposium on Block and Sublevel Caving, Australian Centre for Geomechanics, Perth, pp. 91–106,
Flores, G & Karzulovic, A 2000, Geotechnical guidelines for a transition from open cut to underground mining: benchmarking report, International Caving Study II, Julius Kruttschnitt Mineral Research Centre, Brisbane
Freeport‑McMoRan 2025a, Freeport provides update on PT Freeport Indonesia operations, news release, viewed March 2026,
Freeport‑McMoRan 2025b, Freeport provides update on restart plans for Grasberg minerals district, news release, viewed March 2026,
Hanani, S, Stegman, C, Herselman, S, Rodda, B & McKellar, I 2026, ‘Oyu Tolgoi - Hugo North Lift 1 Update – Panel 0 Performance and the Commencement of Panel 2’, in A van As, D Cumming-Potvin & J Wesseloo (eds), Caving 2026: Proceedings of the Sixth International Conference on Block and Sublevel Caving, Australian Centre for Geomechanics, Perth.
Lolona, S, Campbell, R, Edgar, I, Priatna, A & Haque, I 2024, ‘Implementation of major mining strategy changes at the Deep Mill Level Zone (DMLZ) mine, PT Freeport Indonesia’, in D Johansson & H Schunnesson (eds), MassMin 2024: Proceedings of the International Conference & Exhibition on Mass Mining, Luleå University of Technology, Luleå, pp. 73–85,
Newcrest 2017, Update on status of Cadia operation, news release, viewed 10 July 2026 at 170427_Update on status of Cadia operation - Market Release
Newcrest 2021, Newcrest briefing book, May, viewed 28 January 2024, www.minedocs.com/21/Newcrest-CP1-2021.pdf
Paetzold, H, Lourens, P & Brazier, R 2020, 'Reopening and closure of a block cave', in R Castro, F Báez & K Suzuki (eds), MassMin 2020: Proceedings of the Eighth International Conference & Exhibition on Mass Mining, University of Chile, Santiago, pp. 103–114
Pierce, ME, Campbell, R, Llewelyn, K, Fuenzalida, M, Simanjuntak, K, Kurniawan, … Rogers, S 2020, ‘Cave propagation factor for caving rate and drawpoint productivity forecasting at PTFI’, in R Castro, F Báez & K Suzuki (eds), MassMin 2020: Proceedings of the Eighth International Conference & Exhibition on Mass Mining, University of Chile, Santiago, pp. 519–534,
Rio Tinto 2025, Update on Oyu Tolgoi mine plan, news release, viewed 5 January 2025, www.riotinto.com/en/news/releases/2025/update-on-oyu-tolgoi-mine-plan
Rojas, E, Muñoz, A & Landeros Córdova, P 2023, ‘Evolution of dynamic rock support systems at the El Teniente mine’, in J Wesseloo (ed.), Ground Support 2023: Proceedings of the 10th International Conference on Ground Support in Mining, Australian Centre for Geomechanics, Perth, pp. 129–140,
Ross, IT 2018, ‘Benchmarking and its application for caving projects’, in Y Potvin & J Jakubec (eds), Caving 2018: Proceedings of the Fourth International Symposium on Block and Sublevel Caving, Australian Centre for Geomechanics, Perth, pp. 473–486,
Sainsbury, DP & Loring, DM 2013, ‘Analysis of extraction level performance at the Henderson Mine’, in Y Potvin & B Brady (eds), Ground Support 2013: Proceedings of the Seventh International Symposium on Ground Support in Mining and Underground Construction, Australian Centre for Geomechanics, Perth, pp. 539–550,
Shea, NA, Sinclair, RW & Welsh, TM 2018, ‘Safely re-opening a collapsed extraction level drive in a resource-limited environment’, in Y Potvin & J Jakubec (eds), Caving 2018: Proceedings of the Fourth International Symposium on Block and Sublevel Caving, Australian Centre for Geomechanics, Perth, pp. 45–56,
Simanjuntak, K, Primadiansyah, A, Soumilena, N & Teweng, W 2020, ‘Driving and managing stress in the Deep Mill Level Zone caving mine’, in in R Castro, F Báez & K Suzuki (eds), MassMin 2020: Proceedings of the Eighth International Conference on Mass Mining, University of Chile, Santiago, pp. 394–405,
Stegman, CL, Togtokhbayar, O, Herselman, S & Altankhuu, B 2022, ‘Oyu Tolgoi: engineering a Mongolian caving dynasty’, in Y Potvin (ed.), Caving 2022: Proceedings of the Fifth International Conference on Block and Sublevel Caving, Australian Centre for Geomechanics, Perth, pp. 625–634,
Ulziijargal, M, Enkhtaivan, E, Purevdorj, M, Purwanto, H, Simanjuntak, K & Moorcroft, T 2024, ‘Oyu Tolgoi geotechnical monitoring system’, in D Johansson & H Schunnesson (eds), MassMin 2024: Proceedings of the International Conference & Exhibition on Mass Mining, Luleå University of Technology, Luleå, pp. 383–397,
Webster, S, Samosir, E & Wyllie, A 2020, ‘Learnings from mining cave extensions at Northparkes Mines and new technology to improve the value of future cave designs’, in R Castro, F Báez & K Suzuki (eds), MassMin 2020: Proceedings of the Eighth International Conference & Exhibition on Mass Mining, University of Chile, Santiago, pp. 92–102
© Copyright 2026, Australian Centre for Geomechanics (ACG), The University of Western Australia. All rights reserved.
View copyright/legal information
Please direct any queries or error reports to repository-acg@uwa.edu.au
View copyright/legal information
Please direct any queries or error reports to repository-acg@uwa.edu.au