Practical fragmentation estimates using a new block cave fragmentation tool
|
Authors: Xu, Y-H; Esterhuizen, G; Jakubec, J; Russo, A; Thomas, A Open access courtesy of:
|
DOI https://doi.org/10.36487/ACG_repo/2645_32
Cite As:
Xu, Y-H, Esterhuizen, G, Jakubec, J, Russo, A & Thomas, A 2026, 'Practical fragmentation estimates using a new block cave fragmentation tool', in A van As, D Cumming-Potvin & J Wesseloo (eds), Caving 2026: Proceedings of the Sixth International Conference on Block and Sublevel Caving, Australian Centre for Geomechanics, Perth, pp. 1-15, https://doi.org/10.36487/ACG_repo/2645_32
Abstract:
Realistic fragmentation estimates are a critical input for block cave mine design, yet they remain a great challenge for mining practitioners. The block cave fragmentation (BCF) software has been utilised in cave mining design since the 1990s. Although realistic input parameters are key to obtain realistic results in any methodology, fragmentation predictions using BCF or any available tools are challenging especially in predicting the smaller rock fragments and fines (<5 cm). This is largely due to a scarcity of field data from operating caves required to calibrate prediction logic. Consequently, the proportion of fines is often underestimated, despite the introduction of sophisticated approaches such as explicit modelling using discrete fracture networks (DFN) and numerical codes. The authors discuss the reasons for the poor correlation between predictions and operational reality across all 3 fragmentation stages: in situ, primary, and secondary. This paper reviews initial experiences with the newly released BCF version 4 (V4), which attempts to address these shortcomings by improved simulation of the crushing/grinding/block splitting processes in a draw column. Significantly, the updated BCF has been calibrated against fragmentation data collected from mines with diverse rock mass characteristics at varying depths, including jointed, weak, and veined ground. The paper also outlines a refined workflow, tested against real-world cases, that incorporates DFN and threedimensional fracture-mechanics-based hybrid codes (3D-FDEM).
Keywords: block caving, fragmentation, fines predication, DFN, 3D-FDEM
References:
Brown, ET 2003, Block Caving Geomechanics, Julius Kruttschmitt Mineral Research Centre, The University of Queensland, Indooroopilly.
Brunton, I, Lett, J & Thornhill, T 2016, ‘Fragmentation prediction and assessment at the Ridgeway Deeps and Cadia East cave operations’, MassMining 2016: Proceedings of the 7th International Conference & Exhibition on Mass Mining, Australasian Institute of Mining and Metallurgy, Melbourne, pp. 151–160.
Castro, R, Orellana, L & Pineda, M 2012, ‘Physical modelling as an engineering tool for mining: theory and practice’, Mass Mining 2012: Proceedings of the 6th International Conference & Exhibition on Mass Mining, Canadian Institute of Mining, Metallurgy and Petroleum, Westmount.
Esterhuizen, GS 1998, Block Cave Fragmentation (BCF) User’s manual, unpublished.
Esterhuizen, GS, Laubscher, DH, Bartlett, PJ & Kear, RM 1996, ‘An expert system approach to predicting fragmentation in block caving’, MassMin 1996: Proceedings of the 2nd International Conference & Exhibition on Mass Mining, Southern African Institute of Mining and Metallurgy, Johannesburg.
Fuenzalida, M, Orrego, C & Ghazvinian, E 2024, ‘Back analysis and forecast of cave fragmentation at Cadia East mine’, in Daniel Johansson & Håkan Schunnesson (eds), MassMin 2024: Proceedings of the International Conference & Exhibition on Mass Mining, Luleå University of Technology, Luleå, pp. 679–691,
Gómez, R, Castro, R, Casali, A, Palma, S & Hekmat, A 2017, ‘A comminution model for secondary fragmentation assessment for block caving’, Rock Mechanics and Rock Engineering, vol. 50, no. 11, pp. 3073–3084.
Hormazabal, E & Russo, A 2023, ‘Practical estimation of veinlets shear strength properties in hypogene rock mass’, in Schubert & Kluckner (eds), Proceedings of the 15th ISRM Congress & 72nd Geomechanics Colloquium, Salzburg, pp. 2733–2738.
Jakubec, J 2013, ‘Role of defects in rock mass classification’, in Y Potvin & B Brady (eds), Ground Support 2013: Proceedings of the Seventh International Symposium on Ground Support in Mining and Underground Construction, Australian Centre for Geomechanics, Perth, pp. 337–344,
Jakubec, J 2014, ‘Fragmentation estimates using BCF software – experiences and pitfalls’, in R Castro (ed), Proceedings of the 3rd International Symposium on Block and Sublevel Caving, Universidad de Chile, Santiago.
Jakubec, J, Board, M, Campbell, R, Pierce, M & Zaro, D 2012, ‘Rock mass strength estimate—Chuquicamata case study’, Mass Mining 2012: Proceedings of the 6th International Conference & Exhibition on Mass Mining, Canadian Institute of Mining, Metallurgy and Petroleum, Westmount, pp. 10–14.
Laubscher, DH 1993, ‘Planning mass mining operations’, in JA Hudson (ed.), Analysis and Design Methods, Pergamon, pp. 547–583.
Laubscher, DH 1994, ‘Cave mining-the state of the art’, Journal of The Southern African Institute of Mining and Metallurgy, vol. 94, no. 10, pp. 279–293.
Laubscher, DH & Jakubec, J 2001, ‘The MRMR rock mass classification for jointed rock masses’, in WA Hustrulid & RL Bullock (eds), Underground Mining Methods: Engineering Fundamentals and International Case Studies, Society for Mining, Metallurgy and Exploration, Englewood, pp. 475–481.
Li, Y & Elmo, D 2025, ‘Understanding secondary fragmentation characteristics in cave mining: A simulation-based analysis of impact and compression-induced breakage’, Geosciences, vol. 15, no. 4
Mesri, G & Vardhanabhuti, B 2009, ‘Compression of granular materials’, Canadian Geotechnical Journal, vol. 46, no. 4, pp. 369–392,
Nadolski, S, Munkhchuluun, M, Klein, B, Elmo, D & Hart, C 2018, ‘Cave fragmentation in a cave-to-mill context at the New Afton Mine part I: fragmentation and hang-up frequency prediction’, Mining Technology, vol. 127, no. 2, pp. 75–83.
Ngidi, SN & Pretorius, DD 2010, ‘Impact of poor fragmentation on cave management’, in Y Potvin (ed.), Caving 2010: Proceedings of the Second International Symposium on Block and Sublevel Caving, Australian Centre for Geomechanics, Perth, pp. 593–601,
Pierce, M, Weatherley, DK & Kojovic, T 2010, ‘A hybrid methodology for secondary fragmentation prediction in cave mines’, in Y Potvin (ed.), Caving 2010: Proceedings of the Second International Symposium on Block and Sublevel Caving, Australian Centre for Geomechanics, Perth, pp. 567–581.
Srikant, A 2006, ‘Fragment size estimation and measurement in the DOZ block cave’, Mining Engineering, vol. 58, no. 10, pp. 43–47.
Vergara, Á, Fuentes, R & Palma, S 2024, ‘Numerical analysis of impact breakage in caving mining’, in MassMin 2024: Proceedings of the 9th International Conference and Exhibition on Mass Mining, Kiruna, pp. 518–524,
Xu, YH, Jakubec, J, Thomas, A, Li, Y & Zhu, D 2025, ‘Cave-scale Mine Modeling Challenges and a New 3D-FDEM Modeling Concept’, Proceedings of the ARMA US Rock Mechanics/Geomechanics Symposium, American Rock Mechanics Association, Eaton.
Xu, YH, Li, Y, Jakubec, J & Thomas, A 2026, ‘Modelling of rock mass fracturing, fragmentation and preconditioning to assist in caving design’, in A van As, D Cumming-Potvin & J Wesseloo (eds), Caving 2026: Proceedings of the Sixth International Conference on Block and Sublevel Caving, Australian Centre for Geomechanics, Perth,
© Copyright 2026, Australian Centre for Geomechanics (ACG), The University of Western Australia. All rights reserved.
View copyright/legal information
Please direct any queries or error reports to repository-acg@uwa.edu.au
View copyright/legal information
Please direct any queries or error reports to repository-acg@uwa.edu.au