Management of orepasses in poor ground: learnings from Carrapateena sublevel cave
|
Authors: O'Bree, M; Karn, S; Peters, C; Aslin, J Open access courtesy of:
|
DOI https://doi.org/10.36487/ACG_repo/2645_69
Cite As:
O'Bree, M, Karn, S, Peters, C & Aslin, J 2026, 'Management of orepasses in poor ground: learnings from Carrapateena sublevel cave', in A van As, D Cumming-Potvin & J Wesseloo (eds), Caving 2026: Proceedings of the Sixth International Conference on Block and Sublevel Caving, Australian Centre for Geomechanics, Perth, pp. 1-15, https://doi.org/10.36487/ACG_repo/2645_69
Abstract:
At Carrapateena orepasses are a critical component of the material handling system, connecting sublevel cave (SLC) production levels to the primary crusher. Four orepasses were developed for efficient ore movement in the production ramp-up phase of the SLC, however, poorer than expected ground conditions created challenges for continual safe access and use of this infrastructure. Two of the northern orepasses (MAP-200 and MAP-300) experienced overbreak of 2–3 times the design diameter within the first months of use, threatening productivity and safe access in a spatially constrained mine plan. A robust management system utilising LiDAR scanning, strict pass level control, extensometer monitoring and additional cable bolt support was successfully implemented, enabling productive use of these passes without lining or extensive rehabilitation.
Keywords: orepass, LiDAR, monitoring, geotechnical, production, design, management
References:
Bunker, KA, Campbell, AD, O’Toole, D & Penney, A 2015, 'Guidelines for orepass design in a sublevel cave mine', in Y Potvin (ed.), Design Methods 2015: Proceedings of the International Seminar on Design Methods in Underground Mining, Australian Centre for Geomechanics, Perth, pp. 585-600,
Cave, B, Lilly, R, Hand, M, Varga, J, Light, S, Leslie, D, ... Klingberg, L 2024, ‘A temporal framework for the Carrapateena Iron Oxide Copper-Gold (IOCG) deposit, Eastern Gawler Craton, South Australia’, Ore Geology Reviews, vol. 169,
Esmaieli, K & Hadjigeorgiou, J 2009, ‘Influence of finger configuration on degradation of ore pass walls’, in M Diederichs & G Grasselli (eds), Proceedings of the 3rd CANUS Rock Mechanics Symposium, Toronto.
Hadjigeorgiou, J & Stacey, TR 2011, 'The absence of strategy in orepass planning, design and management', in Y Potvin (ed.), Strategic versus Tactical 2011: Proceedings of the Fourth International Seminar on Strategic versus Tactical Approaches in Mining, Australian Centre for Geomechanics, Perth, pp. 129-140,
Hadjigeorgiou, J, Lessard, JF & Mercier-Langevin, F 2005, ‘Ore pass practice in Canadian mines’, The Journal of the South African Institute of Mining and Metallurgy, vol. 105, pp. 809–816.
Kaiser, PK & Kim, B-H 2008, 'Rock Mechanics Challenges in Underground Construction and Mining', in Y Potvin, J Carter, A Dyskin & R Jeffrey (eds), SHIRMS 2008: Proceedings of the First Southern Hemisphere International Rock Mechanics Symposium, Australian Centre for Geomechanics, Perth, pp. 23-38,
Maptek 2024, PointStudio, version 2024.0.1, computer software, Johannesburg.
Marinos, P & Hoek, E 2000, ‘GSI: A Geologically Friendly Tool for Rock Mass Strength Estimation’, paper presented at ISRM International Symposium, Melbourne, November.
Martin, C.D., Kaiser, P.K. & McCreath, D.R. 1999, ‘Hoek-Brown parameters for predicting the depth of brittle failure around tunnels’, Canadian Geotechnical Journal, vol. 36, no. 1,
Perras, M.A. & Diederichs, M.S. 2016, ‘Predicting excavation damage zone depths in brittle rocks’, Journal of Rock Mechanics and Geotechnical Engineering, vol. 8, pp. 60–74,
Rocscience 2022, RocFall2, version 8.0.20, computer software, Toronto.
Salmi, E.F., Phan, T, Sellers, E. J. & Stacey, T. R. 2024, ‘A review on the geotechnical design and optimisation of ultra-long ore passes for deep mass mining’, Environmental Earth Sciences, vol. 83, no. 301,
Sjöberg, J, Bolin, A, Sánchez Juncal, A, Wettainen, T, Mas Ivars, D & Perman, F 2015, ‘Input to orepass design — a numerical modelling study’, in Y Potvin (ed.), Design Methods 2015: Proceedings of the International Seminar on Design Methods in Underground Mining, Australian Centre for Geomechanics, Perth, pp. 571–584,
Skawina, B, Greberg, J, Salama, A & Gustafson, A 2018, ‘The effects of orepass loss on loading, hauling, and dumping operations and production rates in a sublevel caving mine’, The Journal of the Southern African Institute of Mining and Metallurgy, vol. 118, pp. 409–418,
Sredniawa, W, Skawina, B, Rapp, J, Shekhar, G & Gunillasson, J 2022, ‘Longevity chart for planning production and the renovation of orepasses’, in Y Potvin (ed.), Caving 2022: Proceedings of the Fifth International Conference on Block and Sublevel Caving, Australian Centre for Geomechanics, Perth, pp. 369–380,
© Copyright 2026, Australian Centre for Geomechanics (ACG), The University of Western Australia. All rights reserved.
View copyright/legal information
Please direct any queries or error reports to repository-acg@uwa.edu.au
View copyright/legal information
Please direct any queries or error reports to repository-acg@uwa.edu.au