A review of ground support mesh testing around the world

doi:10.36487/ACG_repo/2325_25

Authors: Morkel, IG; Mikula, PA; Whiting, RK

Download Paper

Open access courtesy of:

DOI https://doi.org/10.36487/ACG_repo/2325_25

Cite As:
Morkel, IG, Mikula, PA & Whiting, RK 2023, 'A review of ground support mesh testing around the world', in J Wesseloo (ed.), Ground Support 2023: Proceedings of the 10th International Conference on Ground Support in Mining, Australian Centre for Geomechanics, Perth, pp. 373-398, https://doi.org/10.36487/ACG_repo/2325_25

Download citation as: ris bibtex endnote text Zotero

Abstract:
As mines around the world get deeper and the stresses around the excavations increase, the occurrence of large damaging seismic events (often called rockbursts) become more commonplace. One of the most favoured controls used in the industry to reduce damage from large seismic events is the implementation of a ground support system. Such a system typically comprises bolts or cables and surface support, such as shotcrete, mesh or screen, and straps. It is important to test all components of a dynamic ground support system, but there is a lack of useful testing done for surface support. Reviews and discussions of test results sourced from different test facilities show a wide scatter of energy absorption and deformation capacity. This, on top of concerns with testing setups, makes the consideration of surface support in support designs very difficult. In this paper, we discuss the current surface support testing results for mesh, and comment on whether current testing practices are producing useful metrics for geotechnical design.

Keywords: ground support, surface support, mesh, screen, testing, dynamic testing, capacity

References:

Abreu, R & Knox, G 2022, ‘The influence of drilling on the performance of a yielding self-drilling rockbolt’, in Y Potvin (ed.), Caving 2022: Fifth International Conference on Block and Sublevel Caving, Australian Centre for Geomechanics, Perth, pp. 165–176,

Anderson, DK & Wham, BP 2019, Wire Mesh Tension Testing, Center for Infrastructure, Energy, and Space Testing, University of Colorado, Boulder.

Benton, D, Sweet, D & Emery, T 2022, ‘Comparative analysis of synthetic and steel mesh performance’, Proceedings of the 56th U.S. Rock Mechanics/Geomechanics Symposium, American Rock Mechanics Association, Alexandria.

Brändle, R & Luis Fonseca, R 2019, ‘Dynamic testing of surface support systems’, in J Hadjigeorgiou & M Hudyma (eds), Ground Support 2019: Proceedings of the Ninth International Symposium on Ground Support in Mining and Underground Construction, Australian Centre for Geomechanics, Perth, pp. 243–250,

Brändle, R, Luis Fonseca, R, von Rickenbach, G, Fischer, G, Vallejos, JA, Marambio, E, … & Cuello, D 2022, ‘Large-scale dynamic testing of ground support systems at the Walenstadt testing facility’, in Y Potvin (ed.), Caving 2022: Fifth International Conference on Block and Sublevel Caving, Australian Centre for Geomechanics, Perth, pp. 177–190,

ACG_repo/2205_10

Bucher, R, Cala, M, Zimmermann, A, Balg, C & Roth, A 2013, ‘Large scale field tests of high‐tensile steel wire mesh in combination with dynamic rockbolts subjected to rockburst loading’, in Y Potvin & B Brady (eds), Ground Support 2013: Proceedings of the Seventh International Symposium on Ground Support in Mining and Underground Construction, Australian Centre for Geomechanics, Perth, pp. 221–232,

Crompton, BR & Knox, G 2022, ‘Dynamic testing: determining the relationship between rockbolt diameter and the residual dynamic capacity of an axially strained tendon’, in Y Potvin (ed.), Caving 2022: Fifth International Conference on Block and Sublevel Caving, Australian Centre for Geomechanics, Perth, pp. 141–150,

Darlington, B, Graham, J, Mikula, P & Young, P 2022, ‘In situ dynamic testing of mesh straps and W-Straps’, Proceedings of the AusRock Conference, Australasian Institute of Mining and Metallurgy, Carlton.

Doran, M, Hatch, X, Mahoney, T & Mungar, G 2023, ‘Impact testing of raise bore protection mesh’, Proceedings of the Underground Operators Conference, Australasian Institute of Mining and Metallurgy, Carlton, pp. 62–69.

Hadjigeorgiou, J & Stacey, T 2018, ‘Challenges in determining the capacity of mesh’, Proceedings of the Fourth Australasian Ground Control in Mining Conference, Australasian Institute of Mining and Metallurgy, Carlton, pp. 280–290.

Hagan, T, Milev, A, Spottiswoode, S, Hildyard, M, Grodner, M, Rorke, A, … & Grave, D 2001, ‘Simulated rockburst experiment-an overview’, Journal of the Southern African Institute of Mining and Metallurgy, vol. 101, no. 5, pp. 217–222.

Haile, A & Le Bron, K 2001, ‘Simulated rockburst experiment-evaluation of rock bolt reinforcement performance’, Journal of the Southern African Institute of Mining and Metallurgy, vol. 101, no. 5, pp. 247–251.

Heal, D, Hudyma, M & Potvin, Y 2006, ‘Evaluating rockburst damage potential in underground mining’, Proceedings of the 41st U.S. Symposium on Rock Mechanics, American Rock Mechanics Association, Alexandria.

Heal, DP, Hudyma, MR, Langille, CC, Potvin, Y, Butcher, RJ, Ball, R & Hartmann, B 2005, ‘In situ testing of ground support performance under strong dynamic loading’, in Y Potvin & M Hudyma (eds), RaSiM6: Proceedings of the Sixth International Symposium on Rockburst and Seismicity in Mines Proceedings, Australian Centre for Geomechanics, Perth, pp. 85–94,

Hildyard, M & Milev, A 2001a, ‘Simulated rockburst experiment: Development of a numerical model for seismic wave propagation from the blast, and forward analysis’, Journal of the Southern African Institute of Mining and Metallurgy, vol. 101, no. 5, pp. 235–245.

Hildyard, M & Milev, A 2001b, ‘Simulated rockburst experiment: Numerical back-analysis of seismic wave interaction with the tunnel’, Journal of the South African Institute of Mining and Metallurgy, vol. 101, no. 5, pp. 223–234.

John, R, Joseph, R & Sunniva, K 1996, Metals Handbook Ninth Edition Vol. 8 Mechanical Testing, American Society for Metals, Detroit, pp. 701–706.

Kaiser, PK 2014, ‘Deformation-based support selection for tunnels in strainburst-prone ground’, in M Hudyma & Y Potvin (eds), Deep Mining 2014: Proceedings of the Seventh International Conference on Deep and High Stress Mining, Australian Centre for Geomechanics, Perth, pp. 227–240,

Knox, G & Berghorst, A 2019, ‘Dynamic testing: determining the residual dynamic capacity of an axially strained tendon’, in J Hadjigeorgiou & M Hudyma (eds), Ground Support 2019: Proceedings of the Ninth International Symposium on Ground Support in Mining and Underground Construction, Australian Centre for Geomechanics, Perth, pp. 231–242,

Knox, G, Berghorst, A & de Bruin, P 2018, ‘An empirical comparison between new and existing laboratory-based dynamic sample configurations’, in Y Potvin & J Jakubec (eds), Caving 2018: Proceedings of the Fourth International Symposium on Block and Sublevel Caving, Australian Centre for Geomechanics, Perth, pp. 747–758,

Knox, G & Hadjigeorgiou, J 2022, ‘Shear performance of yielding self-drilling anchors under controlled conditions’, in Y Potvin (ed.), Caving 2022: Fifth International Conference on Block and Sublevel Caving, Australian Centre for Geomechanics, Perth, pp. 201–212,

Li, CC, Hadjigeorgiou, J, Mikula, P, Knox, G, Darlington, B, Royer, R,… & Hosp, M 2021, ‘Performance of identical rockbolts tested on four dynamic testing rigs employing the direct impact method’, Journal of Rock Mechanics and Geotechnical Engineering, vol. 13, no. 4, pp. 745–754.

Manjoine, M 1944, ‘Influence of rate of strain and temperature on yield stresses of mild steel’, Journal of Applied Mechanics, vol. 11.

Milev, A, Spottiswoode, S, Rorke, A & Finnie, G 2001, ‘Seismic monitoring of a simulated rockburst on a wall of an underground tunnel’, Journal of the Southern African Institute of Mining and Metallurgy, vol. 101, no. 5, pp. 253–260.

Morton, EC 2009, Static Testing of Large Scale Ground Support Panels, PhD thesis, Curtin University, Perth.

Ortlepp, W 1969, 'An empirical determination of the effectiveness of rockbolt support under impulse loading', Proceedings of the International Symposium on Large Permanent Underground Openings, Universitats-forlaget Oslo, pp. 197–205.

Potvin, Y, Wesseloo, J, Morkel, G, Tierney, S, Woodward, K & Cuello, D 2019, ‘Seismic Risk Management practices in metalliferous mines’, in W Joughin (ed.), Deep Mining 2019: Proceedings of the Ninth International Conference on Deep and High Stress Mining, The Southern African Institute of Mining and Metallurgy, Johannesburg, pp. 123–132,

Reddy, N & Spottiswoode, S 2001, ‘The influence of geology on a simulated rockburst’, Journal of the Southern African Institute of Mining and Metallurgy, vol. 101, no. 5, pp. 267–272.

Stacey, TR & Ortlepp, WD 2001, ‘Tunnel surface support: capacities of various types of wire mesh and shotcrete under dynamic loading’, Journal of The South African Institute of Mining and Metallurgy, vol. 101, pp. 337–342.

Tannant, D, McDowell, G & McCreath, D 1994, 'Shotcrete performance during simulated rockbursts', Proceedings of the International Workshop on Applied Rockburst Research, Santiago.

Tannant, D, Kaiser, PK & Maloney, S 1997, ‘Load - displacement properties of welded - wire, chain - link and expanded metal mesh’, in E Broch, A Myrvang & G Stjern (eds), Proceedings of the International Symposium on Rock Support - Applied Solutions for Underground Structures, Norwegian Society of Chartered Engineers, Oslo, pp. 651–659.

Villaescusa, E 2004, ‘Weld mesh for static rock support in Australia’, in Y Potvin, D Stacey & J Hadjigeorgiou (eds), Surface Support in Mining, Australian Centre for Geomechanics, Perth, pp. 385–390.

Villaescusa, E, Thompson, A, Player, J & Morton, E 2015, Dynamic Testing of Ground Support Systems, report no. 312, Minerals Research Institute of Western Australia, Perth.

Villaescusa, E, Thompson, AG & Player, JR 2013a, ‘A decade of ground support research at the WA School of Mines’, in Y Potvin & B Brady (eds), Ground Support 2013: Proceedings of the Seventh International Symposium on Ground Support in Mining and Underground Construction, Australian Centre for Geomechanics, Perth, pp. 233–245,

ACG_rep/1304_15_Villaescusa

Villaescusa, E, Thompson, AG & Player, JR 2013b, ‘Static and dynamic testing of welded and woven mesh for rock support’, in Y Potvin & B Brady (eds), Ground Support 2013: Proceedings of the Seventh International Symposium on Ground Support in Mining and Underground Construction, Australian Centre for Geomechanics, Perth, pp. 187–196,

ACG_rep/1304_11_Villaescusa

Whiting, RG & Graf, CC 2010, ‘Validation test of ground control for a vertical rise’, Proceedings of the Second Australian Ground Control in Mining Conference, Australasian Institute of Mining and Metallurgy, Carlton.

Whiting, RK 2017, ‘In situ static performance assessment of mine mesh’, in J Wesseloo (ed.), Deep Mining 2017: Proceedings of the Eighth International Conference on Deep and High Stress Mining, Australian Centre for Geomechanics, Perth, pp. 747–762,

© Copyright 2024, Australian Centre for Geomechanics (ACG), The University of Western Australia. All rights reserved.
View copyright/legal information
Please direct any queries or error reports to repository-acg@uwa.edu.au