Rebuli, DB
|
Correlating seismic wave velocity measurements with mining activities at Williams Mine
UMT 2017: Proceedings of the First International Conference on Underground Mining Technology, UMT 2017
|
2017 |
|
Hamman, ECF; du Plooy, DJ; Seery, JM
|
Data management and geotechnical models
Deep Mining 2017: Proceedings of the Eighth International Conference on Deep and High Stress Mining, Deep Mining 2017
|
2017 |
|
Joughin, WC
|
Dealing with uncertainty and risk in the design of deep and high stress mining excavations
Deep Mining 2017: Proceedings of the Eighth International Conference on Deep and High Stress Mining, Deep Mining 2017
|
2017 |
|
Sjöberg, J; Perman, F; Lope Álvarez, D; Stöckel, B-M; Mäkitaavola, K; Storvall, E; Lavoie, T
|
Deep sublevel cave mining and surface influence
Deep Mining 2017: Proceedings of the Eighth International Conference on Deep and High Stress Mining, Deep Mining 2017
|
2017 |
|
Yin, S; Shao, Y; Wu, A; Rao, Y; Chen, X
|
Deformation behaviors of cemented backfill using sulphide-content tailings
Paste 2017: Proceedings of the 20th International Seminar on Paste and Thickened Tailings, Paste 2017
|
2017 |
|
Guo, L; Wang, H; Sun, X; Zhou, J; Liang, X
|
Design and construction of a combined underground paste backfilling and surface paste storage system in Baiyinchagan Polymetallic Mine
Paste 2017: Proceedings of the 20th International Seminar on Paste and Thickened Tailings, Paste 2017
|
2017 |
|
Salamanca, JM; Rodríguez, HE; Moreno, MM
|
Design and construction of a prototype for acidity level control in coal mining liquid effluents
UMT 2017: Proceedings of the First International Conference on Underground Mining Technology, UMT 2017
|
2017 |
|
Hadjigeorgiou, J; Karampinos, E
|
Design tools for squeezing ground conditions in hard rock mines
Deep Mining 2017: Proceedings of the Eighth International Conference on Deep and High Stress Mining, Deep Mining 2017
|
2017 |
|
Ugarte, E; Pourrahimian, Y; Boisvert, JB
|
Determination of optimum drawpoint layout in block caving using sequential Gaussian simulation
UMT 2017: Proceedings of the First International Conference on Underground Mining Technology, UMT 2017
|
2017 |
|
Wu, AX; Cheng, H; Yang, Y; Zhang, L
|
Development and challenge of paste technology in China
Paste 2017: Proceedings of the 20th International Seminar on Paste and Thickened Tailings, Paste 2017
|
2017 |
|
Sotoudeh, F; Kakaie, R; Ataei, M
|
Development of a computer program for underground mine stope optimisation using a heuristic algorithm
UMT 2017: Proceedings of the First International Conference on Underground Mining Technology, UMT 2017
|
2017 |
|
Santarossa, M; Marchant, R
|
Digital imaging and laser measurement of paste pipe wear
Paste 2017: Proceedings of the 20th International Seminar on Paste and Thickened Tailings, Paste 2017
|
2017 |
|
Shelswell, KJ; Labrecque, PO
|
Discrete simulations modelling the impact of operator numbers and truck availability on haulage fleet productivity
UMT 2017: Proceedings of the First International Conference on Underground Mining Technology, UMT 2017
|
2017 |
|
Nezhadshahmohammad, F; Khodayari, F; Pourrahimian, Y
|
Draw rate optimisation in block cave production scheduling using mathematical programming
UMT 2017: Proceedings of the First International Conference on Underground Mining Technology, UMT 2017
|
2017 |
|
Zhang, N; Han, C; Yang, K
|
Dynamic coordination mechanism of paste strength and roof load for gob-side entry retaining
Paste 2017: Proceedings of the 20th International Seminar on Paste and Thickened Tailings, Paste 2017
|
2017 |
|
Dunn, MJ
|
Dynamic ground support — design methodologies and uncertainties
Deep Mining 2017: Proceedings of the Eighth International Conference on Deep and High Stress Mining, Deep Mining 2017
|
2017 |
|
Scolari, F; Brandon, M; Krekula, H
|
Dynamic inflatable, friction rockbolt for deep mining
Deep Mining 2017: Proceedings of the Eighth International Conference on Deep and High Stress Mining, Deep Mining 2017
|
2017 |
|
Gray, I
|
Effective stress in rock
Deep Mining 2017: Proceedings of the Eighth International Conference on Deep and High Stress Mining, Deep Mining 2017
|
2017 |
|
Sturgis, GA; Berberick, DR; Board, MP; Strickland, WH; Swanson, MT
|
Elliptical shaft excavation and furnishing in response to depth induced ground pressure
Deep Mining 2017: Proceedings of the Eighth International Conference on Deep and High Stress Mining, Deep Mining 2017
|
2017 |
|
Mikula, P; Gebremedhin, B
|
Empirical selection of ground support for dynamic conditions using charting of support performance at Hamlet mine
Deep Mining 2017: Proceedings of the Eighth International Conference on Deep and High Stress Mining, Deep Mining 2017
|
2017 |
|
Choi, S-W; Lee, C; Ha, T; Kang, T-H; Chang, S-H
|
Endurance performance of conical picks with hardfacing for improving wear resistance
UMT 2017: Proceedings of the First International Conference on Underground Mining Technology, UMT 2017
|
2017 |
|
Kukkonen, S
|
Energy consumption analysis of battery electric vehicles in underground environments
UMT 2017: Proceedings of the First International Conference on Underground Mining Technology, UMT 2017
|
2017 |
|
Harris, W; Kadiayi, AK; Macdonald, K; Witow, D
|
Environmental discharge criteria and dispersion estimation for mine ventilation exhaust stacks
UMT 2017: Proceedings of the First International Conference on Underground Mining Technology, UMT 2017
|
2017 |
|
Turichshev, A; Cotesta, L; Brummer, R; Beauvais, M
|
Estimation of fill strength requirements using bonded particle modelling for mining under cemented rockfill
UMT 2017: Proceedings of the First International Conference on Underground Mining Technology, UMT 2017
|
2017 |
|
LeRiche, A; Kalenchuk, KS; Diederichs, MS
|
Estimation of in situ stress from borehole breakout for improved understanding of excavation overbreak in brittle-anisotropic rock
Deep Mining 2017: Proceedings of the Eighth International Conference on Deep and High Stress Mining, Deep Mining 2017
|
2017 |
|
Chambers, AJ; Sunderman, CB; Benton, DJ; Brennan, JT; Orr, DT
|
Evaluation and mapping of corrosion in a western USA underground metal mine — year one preliminary results
Deep Mining 2017: Proceedings of the Eighth International Conference on Deep and High Stress Mining, Deep Mining 2017
|
2017 |
|
Rahimi, B; Sharifzadeh, M
|
Evaluation of ground management in underground excavation design
Deep Mining 2017: Proceedings of the Eighth International Conference on Deep and High Stress Mining, Deep Mining 2017
|
2017 |
|
Veenstra, RL; Slattery, T; Chauvier, C; van der Merwe, S
|
Evaluation of Mount Heaney leads slag to produce a cemented backfill
Paste 2017: Proceedings of the 20th International Seminar on Paste and Thickened Tailings, Paste 2017
|
2017 |
|
Lee, D-K
|
Evaluation of the optimum conditions for a local ventilation system in connection with the mine ventilation network
UMT 2017: Proceedings of the First International Conference on Underground Mining Technology, UMT 2017
|
2017 |
|
Dineva, S; Boskovic, M
|
Evolution of seismicity at Kiruna Mine
Deep Mining 2017: Proceedings of the Eighth International Conference on Deep and High Stress Mining, Deep Mining 2017
|
2017 |
|
Mudau, A; Stacey, TR; Govender, RA
|
Experimental investigations into sacrificial support for containment of rockburst damage
Deep Mining 2017: Proceedings of the Eighth International Conference on Deep and High Stress Mining, Deep Mining 2017
|
2017 |
|
Johnson, J; Accioly, A
|
Feedwell is the heart of a thickener
Paste 2017: Proceedings of the 20th International Seminar on Paste and Thickened Tailings, Paste 2017
|
2017 |
|
Williams, R; Zink, D; O’Brien, S
|
Filtered tailings adds value in cost competitive industries
Paste 2017: Proceedings of the 20th International Seminar on Paste and Thickened Tailings, Paste 2017
|
2017 |
|
Zhang, L; Wang, H; Wang, J; Zhang, J; Sun, H
|
Flow characteristics of paste slurry under low atmospheric pressure in high altitude areas
Paste 2017: Proceedings of the 20th International Seminar on Paste and Thickened Tailings, Paste 2017
|
2017 |
|
Liu, X; Zhao, Z; Wang, G; Huang, M
|
Friction losses of classified tailings slurry based on loop pipe testing
Paste 2017: Proceedings of the 20th International Seminar on Paste and Thickened Tailings, Paste 2017
|
2017 |
|
Brändle, R; Rorem, E; Luis, R; Fischer, G
|
Full-scale dynamic tests of a ground support system using high-tensile strength chain-link mesh in El Teniente mine, Chile
UMT 2017: Proceedings of the First International Conference on Underground Mining Technology, UMT 2017
|
2017 |
|
Vatcher, J; McKinnon, SD; Sjöberg, J
|
Geomechanical characteristics inferred from mine-scale rock mass behaviour
Deep Mining 2017: Proceedings of the Eighth International Conference on Deep and High Stress Mining, Deep Mining 2017
|
2017 |
|
Stephenson, RM; Sandy, MP
|
Ground control methods in squeezing and rockburst-prone ground in mining — case studies and benchmarking
Deep Mining 2017: Proceedings of the Eighth International Conference on Deep and High Stress Mining, Deep Mining 2017
|
2017 |
|
Fischer, G; Ruiz-Tagle, J; Bucher, R; Luis, R
|
Ground support installations, using a mechanised unroller and flexible high-tensile strength chain link mesh
Deep Mining 2017: Proceedings of the Eighth International Conference on Deep and High Stress Mining, Deep Mining 2017
|
2017 |
|
Benecke, N
|
iDeepMon – intelligent deep mine shaft inspection and monitoring
UMT 2017: Proceedings of the First International Conference on Underground Mining Technology, UMT 2017
|
2017 |
|
Bewick, RP; Ouellet, A; Otto, S; Gaudreau, D
|
Importance of understanding laboratory strength and modulus testing data for deep mining in hard brittle rocks
Deep Mining 2017: Proceedings of the Eighth International Conference on Deep and High Stress Mining, Deep Mining 2017
|
2017 |
|
Ferreira, N
|
Improving production data quality in underground operations
UMT 2017: Proceedings of the First International Conference on Underground Mining Technology, UMT 2017
|
2017 |
|
Whiting, RK
|
In situ static performance assessment of mine mesh
Deep Mining 2017: Proceedings of the Eighth International Conference on Deep and High Stress Mining, Deep Mining 2017
|
2017 |
|
Goodfellow, SD; Simser, B; Drielsma, C; Gerrie, V
|
In situ stress estimation using acoustic televiewer data
UMT 2017: Proceedings of the First International Conference on Underground Mining Technology, UMT 2017
|
2017 |
|
Olivier, G
|
Inferring subtle stress changes related to blasting and large seismic events in mines using ambient noise
Deep Mining 2017: Proceedings of the Eighth International Conference on Deep and High Stress Mining, Deep Mining 2017
|
2017 |
|
Akdag, S; Karakus, M; Nguyen, G; Taheri, A
|
Influence of specimen dimensions on bursting behaviour of rocks under true triaxial loading condition
Deep Mining 2017: Proceedings of the Eighth International Conference on Deep and High Stress Mining, Deep Mining 2017
|
2017 |
|
Rogers, SF; Bewick, RP; Brzovic, A; Gaudreau, D
|
Integrating photogrammetry and discrete fracture network modelling for improved conditional simulation of underground wedge stability
Deep Mining 2017: Proceedings of the Eighth International Conference on Deep and High Stress Mining, Deep Mining 2017
|
2017 |
|
Lynch, RA
|
Investigation of fracture zone properties using reflected seismic waves from passive microseismicity
Deep Mining 2017: Proceedings of the Eighth International Conference on Deep and High Stress Mining, Deep Mining 2017
|
2017 |
|
Yang, Z
|
Key progress on the filling mining of deep resources in Jinchuan Nickel Deposit
Paste 2017: Proceedings of the 20th International Seminar on Paste and Thickened Tailings, Paste 2017
|
2017 |
|
Hane, I; Belem, T; Benzaazoua, M; Maqsoud, A
|
Laboratory investigation into the compressive strength of cemented paste tailings aggregate fills
UMT 2017: Proceedings of the First International Conference on Underground Mining Technology, UMT 2017
|
2017 |
|
Kalenchuk, KS; Mercer, R; Williams, E
|
Large-magnitude seismicity at the Westwood mine, Quebec, Canada
Deep Mining 2017: Proceedings of the Eighth International Conference on Deep and High Stress Mining, Deep Mining 2017
|
2017 |
|
Firmanulhaq, SA; Kamarea, J; Hasan, R; Putra, F; Salim, F
|
Lessons learnt from egress drift excavation through a minor pillar in an extraction level, Deep Ore Zone mine, Freeport Indonesia, Papua
UMT 2017: Proceedings of the First International Conference on Underground Mining Technology, UMT 2017
|
2017 |
|
Cai, S; Wang, X; Lyu, W; Yang, P
|
Liquefying-damage of mine tailings dams in earthquakes
Paste 2017: Proceedings of the 20th International Seminar on Paste and Thickened Tailings, Paste 2017
|
2017 |
|
Wu, A; Lan, W; Wang, Y; Li, Z; Wang, J; Li, J
|
Low cost and high strength paste filling material with solid waste
Paste 2017: Proceedings of the 20th International Seminar on Paste and Thickened Tailings, Paste 2017
|
2017 |
|
Mgumbwa, J; Page, A; Human, L; Dunn, MJ
|
Managing a change in rock mass response to mining at the Frog’s Leg underground mine
Deep Mining 2017: Proceedings of the Eighth International Conference on Deep and High Stress Mining, Deep Mining 2017
|
2017 |
|
Moulding, CR; Stephenson, RM; Barsanti, BJ; Francis, DD
|
Managing the onset of accelerated deformation in capital development at Agnew Gold Mine
Deep Mining 2017: Proceedings of the Eighth International Conference on Deep and High Stress Mining, Deep Mining 2017
|
2017 |
|
Morrison, D
|
Meeting the productivity challenge below 2.5 kilometres
UMT 2017: Proceedings of the First International Conference on Underground Mining Technology, UMT 2017
|
2017 |
|
Makarov, VV; Ksendzenko, LS; Golosov, AM; Opanasiuk, NA
|
Mesocracking structures of the ‘source type’ in highly stressed rocks
Deep Mining 2017: Proceedings of the Eighth International Conference on Deep and High Stress Mining, Deep Mining 2017
|
2017 |
|
Zhang, H; Hauta, R; Fava, L
|
Mine schedule optimisation with ventilation constraints: a case study
UMT 2017: Proceedings of the First International Conference on Underground Mining Technology, UMT 2017
|
2017 |
|
Cai, SJ; Lyu, WS; Wu, D; Yang, P
|
Mining method optimisation of Bayi gold mine based on the value engineering principle
UMT 2017: Proceedings of the First International Conference on Underground Mining Technology, UMT 2017
|
2017 |
|
Muaka, JJM; Duma, S; Mushangwe, P; Gardner, L; Chindedza, T; Walls, J; Joughin, WC
|
Modelling hard rock jointed pillars using a distinct element and discrete fracture network approach considering the effect of a clay-filled shear structure
Deep Mining 2017: Proceedings of the Eighth International Conference on Deep and High Stress Mining, Deep Mining 2017
|
2017 |
|
Salamanca, JM; Rodriguez-Diaz, OO; Fernández, AA; Niño-Merchan, JJ; Rojas, B
|
Modernisation of the underground coal mining sector in Colombia – a proposal from the academy
UMT 2017: Proceedings of the First International Conference on Underground Mining Technology, UMT 2017
|
2017 |
|
Suorineni, FT
|
Myths of deep and high stress mining — reality checks with case histories
Deep Mining 2017: Proceedings of the Eighth International Conference on Deep and High Stress Mining, Deep Mining 2017
|
2017 |
|
Ahmed, SN; Gagnon, JD, Makhdoom, MN; Naeem, R; Wang, J
|
New methods and equipment for three-dimensional laser scanning, mapping and profiling underground mine cavities
UMT 2017: Proceedings of the First International Conference on Underground Mining Technology, UMT 2017
|
2017 |
|
Wang, X; Cai, M
|
Numerical analysis of ground motion in a South African mine using SPECFEM3D
UMT 2017: Proceedings of the First International Conference on Underground Mining Technology, UMT 2017
|
2017 |
|
Yang, PY; Li, L
|
Numerical and limit equilibrium stability analyses of cemented mine backfill upon vertical exposure
UMT 2017: Proceedings of the First International Conference on Underground Mining Technology, UMT 2017
|
2017 |
|
Schmidt, ES; Eberhardt, E
|
Numerical investigation of the use of hydraulic stimulation to mitigate fault slip risk in deep mines
Deep Mining 2017: Proceedings of the Eighth International Conference on Deep and High Stress Mining, Deep Mining 2017
|
2017 |
|
Raffaldi, MJ; Chambers, DJA; Johnson, JC
|
Numerical study of the relationship between seismic wave parameters and remotely triggered rockburst damage in hard rock tunnels
Deep Mining 2017: Proceedings of the Eighth International Conference on Deep and High Stress Mining, Deep Mining 2017
|
2017 |
|
Salter, R; Woolley, C
|
Optimising cemented paste fill at Darlot Gold Mine through the use of BASF product MasterRoc MF 505C
Paste 2017: Proceedings of the 20th International Seminar on Paste and Thickened Tailings, Paste 2017
|
2017 |
|
Yang, X; Guo, L; Shi, C; Liu, G; Peng, X; Xu, W; Li, Z; Jia, Q
|
Optimized tailings paste backfill combined with ore concentration processes
Paste 2017: Proceedings of the 20th International Seminar on Paste and Thickened Tailings, Paste 2017
|
2017 |
|
Johnson, J; Xie, W
|
Paste and thickened tailings water benefits – case studies
Paste 2017: Proceedings of the 20th International Seminar on Paste and Thickened Tailings, Paste 2017
|
2017 |
|
Li, H; Zhang, J; Zhang, D; Li, Z; Hu, G
|
Paste pipeline transportation for Chambishi Copper Mine
Paste 2017: Proceedings of the 20th International Seminar on Paste and Thickened Tailings, Paste 2017
|
2017 |
|
Longo, S; Pigeon, P; Pretorius, C
|
Paste technology – not just for mining anymore
Paste 2017: Proceedings of the 20th International Seminar on Paste and Thickened Tailings, Paste 2017
|
2017 |
|
Chang, S-H; Choi, S-W; Lee, C; Kang, T-H; Kim, J; Choi, M-S
|
Performance comparison between thin spray-on liners with different compositions
UMT 2017: Proceedings of the First International Conference on Underground Mining Technology, UMT 2017
|
2017 |
|
Kosonen, M; Kauvosaari, S; Gao, S; Henriksson, B
|
Performance optimization of paste thickening
Paste 2017: Proceedings of the 20th International Seminar on Paste and Thickened Tailings, Paste 2017
|
2017 |
|
Benton, DJ; Seymour, JB; Boltz, MS; Raffaldi, MJ; Finley, SA
|
Photogrammetry in underground mining ground control — Lucky Friday mine case study
Deep Mining 2017: Proceedings of the Eighth International Conference on Deep and High Stress Mining, Deep Mining 2017
|
2017 |
|
Che, Y; Feng, M; Xue, T
|
Pilot plant study of dry deposition of paste tailings in Baogang West Mine
Paste 2017: Proceedings of the 20th International Seminar on Paste and Thickened Tailings, Paste 2017
|
2017 |
|
Ortiz, A; Rosewall, A; Goosen, P
|
Pumping system design challenges for high-density iron ore tailings with highly variable slurry rheology
Paste 2017: Proceedings of the 20th International Seminar on Paste and Thickened Tailings, Paste 2017
|
2017 |
|
Raffaldi, MJ; Martin, LA; Benton, DJ; Sunderman, CB; Stepan, MA; Powers, MJ
|
Quasi-static and mechanical shock testing of reinforced shotcrete surface support
Deep Mining 2017: Proceedings of the Eighth International Conference on Deep and High Stress Mining, Deep Mining 2017
|
2017 |
|
San Martin, YH; Hurtado, JP; Vargas, JP; Acuña, EI
|
Rapid selection strategies for tunnel development auxiliary ventilation systems
UMT 2017: Proceedings of the First International Conference on Underground Mining Technology, UMT 2017
|
2017 |
|
Deng, J
|
Reliability analysis and design of backfill in a cut-and-fill mining method
Paste 2017: Proceedings of the 20th International Seminar on Paste and Thickened Tailings, Paste 2017
|
2017 |
|
Siren, T; Hakala, M; Perras, MA
|
Reliable in situ rock stress measurement from the excavation surface
UMT 2017: Proceedings of the First International Conference on Underground Mining Technology, UMT 2017
|
2017 |
|
Smith-Boughner,LT; Urbancic, TI; Baig, AM
|
Resolving sill pillar stress behaviour associated with blasts and rockbursts
Deep Mining 2017: Proceedings of the Eighth International Conference on Deep and High Stress Mining, Deep Mining 2017
|
2017 |
|
Acuña, EI; Dobson, A
|
Results of the return air raise silencer system upgrade at Totten Mine
UMT 2017: Proceedings of the First International Conference on Underground Mining Technology, UMT 2017
|
2017 |
|
Whittier, M; Hauta, R; Fava, L
|
Robust mine schedule optimisation
UMT 2017: Proceedings of the First International Conference on Underground Mining Technology, UMT 2017
|
2017 |
|
Lee, MF; de Vries, R; Moller, CF
|
Rock stresses, its controls and associated ground behaviour at the Rosebery mine, Tasmania
Deep Mining 2017: Proceedings of the Eighth International Conference on Deep and High Stress Mining, Deep Mining 2017
|
2017 |
|
Yurdakul, E; Jackson, N; Rieder, KA
|
Role of chemical admixtures in improving wet-mix shotcrete performance for ground support
Deep Mining 2017: Proceedings of the Eighth International Conference on Deep and High Stress Mining, Deep Mining 2017
|
2017 |
|
Knobben, C
|
Seismic hazard at the Rosebery mine
Deep Mining 2017: Proceedings of the Eighth International Conference on Deep and High Stress Mining, Deep Mining 2017
|
2017 |
|
Woodward, KR; Tierney, SR
|
Seismic hazard estimation using databases with bimodal frequency–magnitude behaviour
UMT 2017: Proceedings of the First International Conference on Underground Mining Technology, UMT 2017
|
2017 |
|
Louchnikov, V; Sandy, MP
|
Selecting an optimal ground support system for rockbursting conditions
Deep Mining 2017: Proceedings of the Eighth International Conference on Deep and High Stress Mining, Deep Mining 2017
|
2017 |
|
Tarasov, BG
|
Shear ruptures of extreme dynamics in laboratory and natural conditions
Deep Mining 2017: Proceedings of the Eighth International Conference on Deep and High Stress Mining, Deep Mining 2017
|
2017 |
|
Koupouli, NJF; Belem, T; Rivard, P
|
Shear strength between cemented paste backfill and natural rock surface replicas
UMT 2017: Proceedings of the First International Conference on Underground Mining Technology, UMT 2017
|
2017 |
|
Rispin, M; Kleven, OB; Dimmock, R; Myrdal, R
|
Shotcrete: early strength and re-entry revisited – practices and technology
UMT 2017: Proceedings of the First International Conference on Underground Mining Technology, UMT 2017
|
2017 |
|
Bouzeran, L; Furtney, J; Pierce, M; Hazzard, J; Lemos, JV
|
Simulation of ground support performance in highly fractured and bulked rock masses with advanced 3DEC bolt model
Deep Mining 2017: Proceedings of the Eighth International Conference on Deep and High Stress Mining, Deep Mining 2017
|
2017 |
|
Saeidi, N; Romero, A; Fava, L; Allen, C
|
Simulation of large-scale thermal storage in fragmented rock modelled as a discretised porous medium – application to the Natural Heat Exchange Area at Creighton Mine
UMT 2017: Proceedings of the First International Conference on Underground Mining Technology, UMT 2017
|
2017 |
|
Bahrani, N; Hadjigeorgiou, J
|
Some issues in modelling of ground support using the three-dimensional distinct element method
Deep Mining 2017: Proceedings of the Eighth International Conference on Deep and High Stress Mining, Deep Mining 2017
|
2017 |
|
Chen, X; Yan, C; Yu, H
|
Stacking practices of high density tailings
Paste 2017: Proceedings of the 20th International Seminar on Paste and Thickened Tailings, Paste 2017
|
2017 |
|
Abolfazlzadeh, Y; Penhall, SL; McKinnon, SD
|
Statistical analysis of the outlier events from seismic stress inversion
UMT 2017: Proceedings of the First International Conference on Underground Mining Technology, UMT 2017
|
2017 |
|
Palleske, CK; Kalenchuk, KS; Hume, CD; Bawden, WF
|
Strategic use of geotechnical data for maximised value added
Deep Mining 2017: Proceedings of the Eighth International Conference on Deep and High Stress Mining, Deep Mining 2017
|
2017 |
|
Huang, M; Gao, Q
|
Strength and fluidity of cemented paste backfill at Qijiaojing Iron Mine, Northwest China
Paste 2017: Proceedings of the 20th International Seminar on Paste and Thickened Tailings, Paste 2017
|
2017 |
|